WenmarOpen by Wenmar Pro

Service bulletin 22P08 S2

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10225542
Published by NHTSA2022-11-01
Manufacturer's number22P08 S2
Manufacturer's date2022-10-06
NHTSA componentEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)

NHTSA's summary

Certain 2022 Model Year Expedition/Navigator, 2021-2022 Model Year F-150 and Mach-E Vehicles Equipped with Ford/Lincoln Co-Pilot and BlueCruise/ActiveGlideBlueCruise/ActiveGlide Maps Expiration REASON FOR THIS SUPPLEMENT The technical instructions have been updated with additional details and screen shots to assist in successfully updating the gateway module (GWM) and BlueCruise/ActiveGlide Maps. Additional population has been added to the affected vehicles with updated build dates. Added requirement to verify through PTS that the Field Service Action (FSA) is still open (OASIS) and the vehicle has not already received the OTA update

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Equipment and accessories

Vehicles listed
FORD EXPEDITION2022
FORD F-1502021, 2022
FORD F-150 LIGHTNING BEV2022 (the catalog's model; the bulletin names a series or trim of it)
FORD MUSTANG MACH E2021, 2022
LINCOLN NAVIGATOR2022

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
24V8520002024-11-08. EQUIPMENT:OTHER:LABELS
23V4200002023-06-09. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
TSB 24-21262024-05-04. Service bulletin. This article supersedes TSB 24-2093 to address the revised software and include affected 3.5L FHEV vehicles. Some 2021-2023 F-150 vehicles equipped with a gasoline, hybrid or flex fuel engine (non-Lightning) except 2023 F-150 with 3.3L may exhibit inoperative A/C, lack of air flow, blows warm, and/or evidence of the evaporator freezing. This may be due to the software level of the PCM and heating, ventilation and air conditioning (HVAC) module.
SSM 524762024-05-03. Service bulletin. All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
OTAPU0904PPOPRPF2024-04-04. Service bulletin. Quality Improvements include: -Enhance the performance and stability of your driver display while towing.
OTAPU0121FTDIFXF2024-04-04. Service bulletin. Quality Improvements include: -Robustness action in operation of vehicle to detect low-state-of-charge battery and prevent engine stall, as well as provide improved warning to customers when low-state-of-charge conditions exist. -To prevent the potential incorrect On-board scales.
OTAPU10246CHAUDF2024-04-04. Service bulletin. Quality Improvements include: - Fix the infrequent random audio noises issue and improve the audio quality of the vehicle.
OTAPU10246CHAUDL2024-04-04. Service bulletin. Quality Improvements include: - Fix the infrequent random audio noises issue and improve the audio quality of the vehicle.
TSB 24-20582024-04-03. Service bulletin. Some 2021-2023 Mustang Mach-E vehicles may exhibit a wind noise from the exterior mirror/A-pillar area when driving at or above 64 km/h (40 mph). This may be due to poor sealing of the lower mirror foam and the glass top run foam.. Some 2021-2023 Mustang Mach-E vehicles may exhibit a wind noise from the exterior mirror/A-pillar area when driving at or above 64 km/h (40 mph). This may be due to poor sealing of the lower mirror foam and the glass top run foam..
TSB 24-20342024-04-03. Service bulletin. 2021-2023 Mach-E vehicles may exhibit the drive mode default to normal mode while driving and <Drive Mode Not Available> message displays in the center display screen with or without Diagnostic Trouble Code (DTC) U0253 stored in the ABS module. This may be due to the software in the APIM.
TSB 24-20282024-04-03. Service bulletin. This article supersedes 23-2266 to update the vehicle model years affected to include 2024 model year. Some 2022-2024 Expedition/Navigator vehicles may exhibit a random BLIS warning with no vehicle or objects near the vehicle. This condition may be intermittent, more noticeable in wet conditions. Diagnostic trouble codes B13F3:97 in the side obstacle detection control module - left (SODL) and/or B13F4:97 in the side obstacle detection control module - right (SODR) and/or U0233 and U0232 in the image processing module A (IPMA) may also be present. This may be due to a mud/snow/ice build-up between the radar sensor and the rear bumper cover or damage or corrosion to the radar sensor, connector or harness.
SSM 523282024-03-20. Service bulletin. Some 2021-2024 Bronco/F-150, 2023-2024 Escape/F-Super Duty vehicles equipped with SYNC 4 may experience a concern during accessory protocol interface module (APIM) programming where the vehicle's center display screen indicates USB Error. This may be due to a lack of memory space available to perform the APIM software update. If it is a memory concern, the Ford Diagnosis and Repair System (FDRS) will provide an option to delete the voice application. Re-enter the module programming and when prompted, do not select first option - SYNC Module (APIM) Software Update, select the second option - Delete Voice Application(s) From Module. Once deleted, run the SYNC Module (APIM) Software Update as directed, this will update the software and automatically reload the voice app. If the voice delete option is not available, continue with normal diagnostics in the Workshop Manual, Section 418.