Service bulletin 18-014-13

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
Type	Service bulletin
NHTSA id	10216442
Published by NHTSA	2022-07-25
Manufacturer's number	18-014-13
Manufacturer's date	2013-03-19
NHTSA component	POWER TRAIN

NHTSA's summary

Flash: MIL Illumination P0108- Manifold Absolute Pressure Sensor Circuit High This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Code has been set: P0108- Manifold Absolute Pressure Sensor Circuit High

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Transmission and driveline

Trouble codes named

P0108

Vehicles listed
DODGE DURANGO	2011
JEEP GRAND CHEROKEE	2011

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
101232	2024-11-07. Service bulletin. Plate - Planetary
S1709000010	2023-01-09. Service bulletin. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
V51	2022-12-19. Service bulletin. Customer Satisfaction Notification V51 Reprogram Powertrain Control Module
9004009	2022-09-26. Service bulletin. Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
9002877	2022-07-25. Service bulletin. 52124768A$ - Bearing Assy - Rear For any noise related issue, before replacing this part please review and follow the updated "Hub & Bearing Noise Diagnostic Procedure", found in STAR News #75 and in Service Manual. See DealerCONNECT>TechCONNECT>Service Info>Rear Susp>Hub and Bearing>Diagnosis and Testing>Diagnosis and Testing - Hub and Bearing - Noise.
N0802072013	2022-07-25. Service bulletin. Advanced Field Action Communication ? N0802072013 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2009 through 2012 model year: (DS) Ram Truck (ND) Dodge Dakota (HB) Dodge Durango (HG) Chrysler Aspen NOTE: All of the above involved vehicles are equipped with a Chrysler 9.25? rear axle (sales code DRB) or C235 rear axle (sales code DRN). The above vehicles may have been built with a rear axle pinion nut that can loosen, which could result in the rear axle locking up. This could cause a loss of vehicle control and/or a crash with little warning. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Dealers will be notified of the launch of this safety recall by way of established methods used in the past.
08-005-13	2022-07-25. Service bulletin. Flash: Power Liftgate May Not Power Open Or Close This bulletin involves reprogramming the Power Liftgate Module with new software. The customer may experience the Power Lift Gate not opening and closing under power. Upon further investigation the Technician may find that B1882 Power Liftgate Position Sensor 1 Circuit set.Updating the software will correct the conditions listed above.
08-011-13	2022-07-25. Service bulletin. Flash: Power Folding Mirrors Unfold While Cranking This bulletin involves flash reprogramming the Left and Right Front Door Modules (DMFL/DMFR) with new software. The power folding mirrors may unfold while cranking the engine.
21-003-13	2022-07-18. Service bulletin. Flash: Drivetrain Control Module (DCTM) - Transfer Case Operational Enhancements This bulletin involves flashing the Drivetrain Control Module (DCTM) Owners may indicate that they have experienced one or more of the following symptoms:A driveline bump is felt during acceleration at approximately 10 mph (16 kph).The SERV 4WD message appears and the vehicle shifts from 4WD to 2WD.Binding of the front driveline while turning on steep grades at speeds around 3 - 5 mph (5 - 8 kph).
21-004-13	2022-07-18. Service bulletin. Flash: Drivetrain Control Module (DCTM) - Transfer Case Operational Enhancements This bulletin involves flashing the Drivetrain Control Module (DCTM) Owners may indicate that they have experienced one or more of the following symptoms:Moaning or groaning noise while coasting and/or during a very light acceleration around 5 to 8 mph (8 to 13 kph).The SERV 4WD message appears and the vehicle shifts from 4WD to 2WD.Binding of the front driveline while turning on steep grades at speeds around 3 to 5 mph (5 to 8 kph).Surge/Shudder at speeds greater than 50 mph (80 kph).