Service bulletin PC490OL

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
Type	Service bulletin
NHTSA id	10192854
Published by NHTSA	2021-05-10
Manufacturer's number	PC490OL
Manufacturer's date	2017-02-06
NHTSA component	POWER TRAIN; ELECTRICAL SYSTEM:SOFTWARE

NHTSA's summary

Nissan is conducting a voluntary service campaign to reprogram the Continuously Variable Transmission (CVT) software on specific 2014-16 L33 Altima and 2014-2016 Rogue vehicles

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Transmission and driveline, Software

Vehicles listed
NISSAN ALTIMA	2013, 2014, 2015, 2016
NISSAN ROGUE	2014, 2015, 2016

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
14V138000	2014-03-25. AIR BAGS:FRONTAL; ELECTRICAL SYSTEM:SOFTWARE

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
NTB15085B	2021-05-10. Service bulletin. IF YOU CONFIRM: The CVT has a delayed engagement when shifting into Drive or Reverse, and there are no DTCs stored in the ECM and/or TCM. ACTION: Refer to page 5, step 6 in the SERVICE PROCEDURE of this bulletin to check if TCM reprogramming applies to the vehicle you are working on. 1. Reprogram the TCM, if reprogramming applies. 2. Inspect the CVT belt per the SERVICE PROCEDURE in this bulletin. 3. Perform CVT repairs based on inspection results. See this bulletin for further detail.
NTB15-049r	2019-02-19. Service bulletin. TELEMATICS SERVICE INFORMATION This bulletin applies only to vehicles equipped with a Telematics Communication Unit (TCU). This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB18-031b	2018-09-17. Service bulletin. 2016-2018 NISSAN CONNECT NAVIGATION SYSTEM SOFTWARE UPDATE TO RESOLVE SEVERAL ISSUES This bulletin has been amended. The IF YOU CONFIRM section and software number has changed. No other changes have been made. Please discard previous versions of this bulletin.
NTB16-100c	2018-06-18. Service bulletin. 2016-2017 NISSAN CONNECT NAVIGATION SYSTEM SOFTWARE UPDATE This bulletin applies only to vehicles equipped with navigation system. This bulletin has been superseded to NTB18-031. Please discard all previous versions of this bulletin.
NTB18-031a	2018-06-18. Service bulletin. 2016-2018 NISSAN CONNECT NAVIGATION SYSTEM SOFTWARE UPDATE TO RESOLVE SEVERAL ISSUES This bulletin applies only to vehicles equipped with navigation system. This bulletin has been amended to correct Bosch contact information on page 2. No other changes have been made. Please discard previous versions of this bulletin.
NTB16-110e	2017-11-14. Service bulletin. 2015-2017 ALTIMA AND 2014-2016 ROGUE; 4 CYLINDER WITH DTC P0776 AND/OR JUDDER WITH P17F0 OR P17F1 STORED This bulletin applies to Altima vehicles equipped with a 4-cylinder engine only. This bulletin has changed. You must read the entire bulletin to properly perform this repair. Please discard previous versions of this bulletin.
NTB16-100	2017-10-25. Service bulletin. 20162016 NISSAN CONNECT NAVIGATION SYSTEM SOFTWARE UPDATE IF YOU CONFIRM: One or more of the following: - A status message ?Voice Recognition is initializing, please wait? is displayed when pressing the voice recognition button 2-3 minutes after the ignition is first turned ON. NOTE: If the message is displayed within the first 2-3 minutes this is normal. The voice recognition is loading phonebook contacts into its system. - A loud booming noise is emitted from the vehicle?s speaker while connected on a Bluetooth hands-free phone call. - The buttons on the navigation unit intermittently flicker. This is particularly noticeable at night when the buttons are illuminated. - Display night illumination is not automatically detected by the navigation unit. The center display screen illumination does not change at night when it is dark. - The navigation unit reboots (Nissan logo appears after loss of sound) only while listening to XM radio. And - The Software version has been confirmed as ?not current? (refer to page 3). ACTION: Perform the SERVICE PROCEDURE starting on page 2 and reprogram the Navigation system with USB memory stick listed on page 2.
NTB16-117	2017-10-15. Service bulletin. 2016-2017 ALTIMA; MIL ON WITH A/F RATIO SENSOR DTC(s) IF YOU CONFIRM One or more of the following DTCs is stored: - P014C - A/F SENSOR1 (B1) (O2 sensor slow response - rich to lean bank 1 sensor 1) - P014D - A/F SENSOR1 (B1) (O2 sensor slow response - lean to rich bank 1 sensor 1) - P015A - A/F SENSOR1 (B1) (O2 sensor delayed response - rich to lean bank 1 sensor 1) - P015B - A/F SENSOR1 (B1) (O2 sensor delayed response - lean to rich bank 1 sensor 1) ACTION 1. Refer to step 6 in the SERVICE PROCEDURE to confirm this bulletin applies to the vehicle you are working on. If this bulletin applies: 2. Reprogram the ECM. 3. Replace the Air Fuel Ratio (A/F) Sensor 1. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
NTB17-024	2017-08-01. Service bulletin. NAVIGATION SYSTEM REBOOTS WHEN SXM TRAFFIC IS ENABLED This bulletin applies only to vehicles located in the state of Oregon. IF YOU CONFIRM The Navigation system in an Applied Vehicle reboots when SXM Traffic is enabled. NOTE: Perform the steps in this bulletin ONLY if the above condition occurs while the vehicle is in the state of Oregon. ACTION Update the Navigation system software using the DVD shown on page 2.
NTB12-103e	2017-08-01. Service bulletin. CVT / TCM CALIBRATION DATA "WRITE" PROCEDURE This bulletin does not apply to Pathfinder Hybrid, Murano Hybrid or Rogue Hybrid This bulletin has been amended. APPLIED VEHICLES has been updated. SERVICE INFORMATION has been amended. A REPAIR TABLE has been added. Procedural steps have been added to SERVICE PROCEDURE. Discard all previous versions of this bulletin.