Service bulletin PIT5805
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10185753 |
| Published by NHTSA | 2021-01-25 |
| Manufacturer's number | PIT5805 |
| Manufacturer's date | 2020-12-27 |
| NHTSA component | BACK OVER PREVENTION |
NHTSA's summary
This Preliminary information communicates that a dealer may encounter a vehicle that is making a grinding or growling noise on the first few brake applications after the vehicle has been sitting overnight. The dealer is instructed to perform no repairs at this time as engineering is looking into a repair. The dealer is advised that this PI will be converted into a bulletin with repair instruction when updated parts are available.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Driver assistance, Backup camera
| BUICK ENCLAVE | 2021 |
|---|---|
| CADILLAC XT5 | 2021 |
| CADILLAC XT6 | 2021 |
| CHEVROLET BLAZER | 2021 |
| CHEVROLET TRAVERSE | 2021 |
| GMC ACADIA | 2021 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 22V709000 | 2022-09-22. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA |
|---|
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| PIT5931C | 2023-12-04. Service bulletin. This Preliminary information communicates that a vehicle may be encountered with a clunk or rattle from the front of the vehicle. The dealer technician is instructed to remove the cradle brace and see if the noise is gone. If the noise is gone with the brace removed the tech is instructed to reinstall the brace and torque it to specification. |
|---|---|
| PIT5931B | 2023-12-04. Service bulletin. This Preliminary information communicates that a vehicle may be encountered with a clunk or rattle from the front of the vehicle. The dealer technician is instructed to remove the cradle brace and see if the noise is gone. If the noise is gone with the brace removed the tech is instructed to reinstall the brace and torque it to specification. |
| 23-NA-042 | 2023-07-14. Service bulletin. This service bulletin provides repair information to update radio software to correct customer concerns of Software related issues. |
| 23-NA-062 | 2023-06-19. Service bulletin. This service bulletin provides repair information to correct a customer concern of Rear View Camera Issues - DTCs B395A, B395B, B395C, B101E, B101D. |
| 23-NA-062 | 2023-04-14. Service bulletin. This service bulletin provides repair information to correct a customer concern of Rear View Camera Coaxial Related Issues - DTCs B395A, B395B, B395C, B101E, B101D. |
| PIP5623 | 2023-03-13. Service bulletin. This Preliminary information communicates that a rotational clicking noise heard after engine shut down is a design characteristic and no repairs should be attempted. |
| PIT5921A | 2023-03-13. Service bulletin. This Preliminary information communicates diagnostics aids for rear view camera issues that may be encountered. |
| 22-NA-127 | 2023-03-04. Service bulletin. This service bulletin provides repair information on release of Radio Software Version V160 Update to correct customer concerns of radio software issues. |
| PIT5940A | 2022-11-21. Service bulletin. This Preliminary information communicates that a customer may notice that the gridlines on the backup camera are very dim. They may mention that this occurred after an OTA update. The dealer technician is advised to perform no repairs. The technician is advised that engineering is looking into a resolution and the resolution will be communicated through this PI or a bulletin when it becomes available. |
| PIT5931A | 2022-10-17. Service bulletin. This Preliminary information communicates that a vehicle may be encountered with a clunk or rattle from the front of the vehicle. The dealer technician is instructed to remove the cradle brace and see if the noise is gone. If the noise is gone with the brace removed the tech is instructed to reinstall the brace and torque it to specification. |