Service bulletin TSB_BOD213
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10181999 |
| Published by NHTSA | 2020-11-03 |
| Manufacturer's number | TSB_BOD213 |
| Manufacturer's date | 2020-10-26 |
| NHTSA component | EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE:BODY:DOOR |
NHTSA's summary
TECHNICAL SERVICE BULLETIN: SERVICE ACTION: DOOR BELT LINE MOLDING INSPECTION AND REPLACEMENT (SA445) - This bulletin provides the procedure to inspect and replace the front door(s) belt line molding on some 2021MY Telluride (ON) vehicles produced from September 14, 2020 through September 18, 2020, which may have had the incorrect color molding installed during assembly and do not match the rear door belt line moldings.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Body and frame, Equipment and accessories
| KIA TELLURIDE | 2021 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2022468 | 2022-08-16. Accessories |
|---|
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| TSB_BOD340 | 2025-06-11. Service bulletin. TECHNICAL SERVICE BULLETIN: DOOR BELT OUTSIDE WEATHERSTRIP REPLACEMENT (CA2504) - This bulletin provides information to replace the door belt outside weatherstrip(s) on certain 2023-2025MY Telluride (ON) vehicles produced from August 04, 2020 through February 11, 2025. The affected vehicles maybe missing an adhesive layer, causing the outer faceplate to detach/separate from the door belt outside weatherstrip molding. If a customer has a validated complaint of a door belt outside weatherstrip detaching and/or separating, replace it and any weatherstrip(s) that have not yet been replaced under warranty (including SA535 or SA578) according to the VIN list and procedure in this TSB. |
|---|---|
| TSB_ELE320 | 2024-01-06. Service bulletin. TECHNICAL SERVICE BULLETIN: AVN 5.0 WIDE SCREEN FREEZING OR MAP DELAY WITH WIRED APPLE CARPLAY - This bulletin provides information to update the software on 5th Generation AVN wide on certain 2020-2023MY Kia vehicles to remedy an inaccurate map location, freezing AVN screen, or experiencing a delay when using Google Maps or Waze through wired Apple CarPlay. |
| TSB_BOD319 | 2023-08-02. Service bulletin. TECHNICAL SERVICE BULLETIN: SUNROOF WIND DEFLECTOR ARMS AND MECHANISM PARTS REPLACEMENT - This bulletin provides information to perform a partial replacement of the sunroof wind deflector and mechanism arms on some 2019-2022MY Telluride (ON) vehicles produced from February 15, 2019 through January 19, 2022. The affected vehicles may experience the sunroof open/close operation inoperative and/or the sunroof wind deflector function inoperative. |
| TSB_BOD314 | 2023-06-01. Service bulletin. TECHNICAL SERVICE BULLETIN: OVERHEAD CONSOLE SUNGLASS DOOR-LATCH REPAIR - This bulletin provides information to repair the overhead console lamp assembly and sunglass door latch on some 2012-2023MY model vehicles listed in the table below, which may encounter the sunglass case of the overhead console lamp not closing properly. |
| PS576_R2 | 2022-02-04. Service bulletin. PITSTOP: BATTERY DEALER (SHIPPING)/CUSTOMER MODE SWITCH - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This Pitstop provides information regarding a new interface related to the electronic Dealer (Shipping) / Customer Mode Switch setting on all applicable models. |
| TSB_CHA113 | 2022-01-20. Service bulletin. TECHNICAL SERVICE BULLETIN: REAR SHOCK ABSORBER ASSEMBLY NOISE - This bulletin provides information to replace the rear self-leveling shock insulator and locking nut on some 2020-2021MY Telluride (ON) vehicles produced from January 1, 2019 through December 1, 2020 which may exhibit noise from the rear of the vehicle while driving over bumps or on a bumpy road. Replacing the insulator instead of the complete rear shock assembly is recommended to help raise customer satisfaction with the reduced customer repair expense. |
| TSB_ELE231_R3 | 2021-12-23. Service bulletin. TECHNICAL SERVICE BULLETIN: FRONT VIEW CAMERA REPLACEMENT FOR DTC C160449 & C160649 - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on the inspection and replacement of the front camera on some vehicles. Due to an internal control chip concern inside the camera, the vehicle may exhibit a Forward Collision Avoidance Assist Warning Lamp (A) and/or Master Warning Lamp (B) with C160449 and/or C160649 codes. Certain systems may become temporarily disabled during occurrences: Smart Cruise Control (SCC), Lane Keep Assistance (LKA), Lane Departure Warning (LDW), Forward Collision-Avoidance Assist (FCA), Forward Collision Warning (FCW) and/or Driver Attention Warning (DAW). |
| TSB_BOD055_R1 | 2021-10-02. Service bulletin. TECHNICAL SERVICE BULLETIN: INFORMATION FOR HEADLAMP CONDENSATION AND MOISTURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to some Kia models that may exhibit fogging, condensation, and/or moisture inside a headlamp assembly. Generally, a fogging condition is considered normal and can be eliminated by turning on the headlamps with the engine running for up to 30 minutes or during normal driving conditions. Headlamp assembly replacement WILL NOT be necessary in most cases. |
| TSB_ELE246_R1 | 2021-10-02. Service bulletin. TECHNICAL SERVICE BULLETIN: FRONT VIEW CAMERA REPLACEMENT AND SOFTWARE UPGRADE INSTALLATION - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to update the software logic of the front view camera system (FR_CMR) on the vehicles listed below, when a new replacement Front View Camera installed with a part number ending in "SW0". NEW parts with a part number ending in "SW0" do not have the operating software upgrade installed. If the software upgrade is not installed, units will exhibit a warning light ON with Diagnostic Trouble Codes (DTCs) related to the front view camera. Some vehicles require recovery and recording the prior variant coding value before replacement. |
| TSB_ELE231_R2 | 2021-09-03. Service bulletin. TECHNICAL SERVICE BULLETIN: FRONT VIEW CAMERA REPLACEMENT FOR DTC C160449 & C160649 - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on the inspection and replacement of the front camera on some vehicles. Due to an internal control chip concern inside the camera, the vehicle may exhibit a Forward Collision Avoidance Assist Warning Lamp (A) and/or Master Warning Lamp (B) with C160449 and/or C160649 codes. Certain systems may become temporarily disabled during occurrences: Smart Cruise Control (SCC), Lane Keep Assistance (LKA), Lane Departure Warning (LDW), Forward Collision-Avoidance Assist (FCA), Forward Collision Warning (FCW) and/or Driver Attention Warning (DAW). |