WenmarOpen by Wenmar Pro

Service bulletin TSB_BOD340

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11019472
Published by NHTSA2025-06-11
Manufacturer's numberTSB_BOD340
Manufacturer's date2025-06-04
Campaign id or software versionCA2504
NHTSA componentSTRUCTURE:BODY
Manufacturer's systemBOD

NHTSA's summary

TECHNICAL SERVICE BULLETIN: DOOR BELT OUTSIDE WEATHERSTRIP REPLACEMENT (CA2504) - This bulletin provides information to replace the door belt outside weatherstrip(s) on certain 2023-2025MY Telluride (ON) vehicles produced from August 04, 2020 through February 11, 2025. The affected vehicles maybe missing an adhesive layer, causing the outer faceplate to detach/separate from the door belt outside weatherstrip molding. If a customer has a validated complaint of a door belt outside weatherstrip detaching and/or separating, replace it and any weatherstrip(s) that have not yet been replaced under warranty (including SA535 or SA578) according to the VIN list and procedure in this TSB.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Body and frame

Vehicles listed
KIA TELLURIDE2021, 2022, 2023, 2024, 2025

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
20254002025-07-30. Structure
25V4940002025-07-28. STRUCTURE:EXTERIOR TRIM

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
TSB_BOD3292024-08-15. Service bulletin. TECHNICAL SERVICE BULLETIN: SERVICE ACTION: DOOR BELT OUTSIDE WEATHERSTRIP INSPECTION/REPLACEMENT (SA578) - This bulletin provides information to inspect front driver door belt outside weatherstrip on some 2024MY Telluride (ON) vehicles produced from August 1, 2023 through January 18, 2024. The affected vehicles may be missing an adhesive layer causing the outer faceplate to detach/separate from the molding.
TSB_BOD3252024-05-06. Service bulletin. TECHNICAL SERVICE BULLETIN: SERVICE ACTION: RADIATOR GRILLE EMBLEM INSPECTION AND REPLACEMENT (SA566) - This bulletin provides information to inspect and if necessary, replace the front grille emblem on certain 2024MY Telluride (ON) vehicles, produced from November 27, 2023 through February 15, 2024, which may have an improperly adhered (partially detached) or missing front grille emblem.
TSB_BOD3192023-08-02. Service bulletin. TECHNICAL SERVICE BULLETIN: SUNROOF WIND DEFLECTOR ARMS AND MECHANISM PARTS REPLACEMENT - This bulletin provides information to perform a partial replacement of the sunroof wind deflector and mechanism arms on some 2019-2022MY Telluride (ON) vehicles produced from February 15, 2019 through January 19, 2022. The affected vehicles may experience the sunroof open/close operation inoperative and/or the sunroof wind deflector function inoperative.
TSB_BOD3182023-07-05. Service bulletin. TECHNICAL SERVICE BULLETIN: REAR HVAC CONTROL CLIP REPLACEMENT (SA534) - This bulletin provides information to replace the rear Heating Ventilation and Air Condition (HVAC) control assembly retaining clips on some 2022-2023MY Telluride (ON) vehicles produced from August 1, 2022 through May 03, 2023. The affected vehicles are equipped with a metal retaining clip which can create a rattling sound while driving on rougher road conditions. New plastic retaining clips will be installed to help rectify this rattling noise concern.
TSB_BOD3202023-07-01. Service bulletin. TECHNICAL SERVICE BULLETIN: FRONT DRIVER DOOR BELT OUTSIDE WEATHERSTRIP INSPECTION/REPLACEMENT (SA535) - This bulletin provides information to inspect front driver door belt outside weatherstrip on some 2023MY Telluride (ON) vehicles produced from March 13, 2023 through June 6, 2023. The affected vehicles may be missing an adhesive layer causing the outer faceplate to detach/separate from the molding.
TSB_BOD3142023-06-01. Service bulletin. TECHNICAL SERVICE BULLETIN: OVERHEAD CONSOLE SUNGLASS DOOR-LATCH REPAIR - This bulletin provides information to repair the overhead console lamp assembly and sunglass door latch on some 2012-2023MY model vehicles listed in the table below, which may encounter the sunglass case of the overhead console lamp not closing properly.
TSB_BOD315_R12023-04-22. Service bulletin. TECHNICAL SERVICE BULLETIN: SERVICE ACTION: CRASH PAD CENTER SPEAKER GRILL INSPECTION/REPLACEMENT (SA528) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to inspect and, if necessary, replace the crash pad center speaker grill cover on some 2023MY Telluride (ON) vehicles produced from August 31, 2022 through December 22, 2022. Some center speaker grill covers in the subject vehicles may not fit properly on the crash pad.
TSB_BOD3152023-04-06. Service bulletin. TECHNICAL SERVICE BULLETIN: SERVICE ACTION: CRASH PAD CENTER SPEAKER GRILL INSPECTION/REPLACEMENT (SA528) - This bulletin provides information to inspect and, if necessary, replace the crash pad center speaker grill cover on some 2023MY Telluride (ON) vehicles produced from August 31, 2022 through December 22, 2022. Some center speaker grill covers in the subject vehicles may not fit properly on the crash pad.
TSB_CHA1132022-01-20. Service bulletin. TECHNICAL SERVICE BULLETIN: REAR SHOCK ABSORBER ASSEMBLY NOISE - This bulletin provides information to replace the rear self-leveling shock insulator and locking nut on some 2020-2021MY Telluride (ON) vehicles produced from January 1, 2019 through December 1, 2020 which may exhibit noise from the rear of the vehicle while driving over bumps or on a bumpy road. Replacing the insulator instead of the complete rear shock assembly is recommended to help raise customer satisfaction with the reduced customer repair expense.
TSB_BOD055_R12021-10-02. Service bulletin. TECHNICAL SERVICE BULLETIN: INFORMATION FOR HEADLAMP CONDENSATION AND MOISTURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to some Kia models that may exhibit fogging, condensation, and/or moisture inside a headlamp assembly. Generally, a fogging condition is considered normal and can be eliminated by turning on the headlamps with the engine running for up to 30 minutes or during normal driving conditions. Headlamp assembly replacement WILL NOT be necessary in most cases.