Service bulletin 09-038-19-3596
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10168073 |
| Published by NHTSA | 2019-11-21 |
| Manufacturer's number | 09-038-19-3596 |
| Manufacturer's date | 2019-11-04 |
| NHTSA component | EXTERIOR LIGHTING; VISIBILITY; EQUIPMENT ADAPTIVE/MOBILITY |
NHTSA's summary
Some customers may complain that the headlights are not as bright as they had previously been. This is caused by a dulled headlight reflector in the front combination light. To correct this issue, a service part reflector (internal part for discharge type front combination light) has been established instead of having to replace the whole front combination light.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Equipment and accessories, Glass, wipers and mirrors, Lighting
| MAZDA MAZDA6 | 2014, 2015 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| SA-032-23a | 2023-11-02. Service bulletin. If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. |
|---|---|
| SA-039-23a | 2023-10-05. Service bulletin. Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection. |
| SA-036-23 | 2023-07-05. Service bulletin. Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way. NOTE: The antistatic effect does not deteriorate with this procedure. |
| SA-012-23 | 2023-04-04. Service bulletin. Some customers may report an odor or water in the HVAC system and upon inspection, the cabin air filter may be found to be wet. |
| SA-016-23 | 2023-04-04. Service bulletin. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method. B. Auxiliary Key Code Cut Method |
| SA-010-23 | 2023-03-03. Service bulletin. Some customers may experience one or more electrical malfunctions after a vehicle body repair. The newly painted fender stay (2) may be causing a poor front harness (1) ground connection. |
| SA-016-22a | 2023-01-05. Service bulletin. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method |
| SA-039-22 | 2022-07-06. Service bulletin. Some customers may complain about scratches on the instrument cluster lens. |
| 0901216 | 2022-06-06. Service bulletin. Paint damage Mazda pocket paint guide |
| 0900516 | 2022-06-06. Service bulletin. Siriusxm satellite radio registration transfer after unit replacement |