Service bulletin 19-GI-002G
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10158908 |
| Published by NHTSA | 2019-04-22 |
| Manufacturer's number | 19-GI-002G |
| Manufacturer's date | 2019-03-19 |
| NHTSA component | EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE:FRAME AND MEMBERS |
NHTSA's summary
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) set a threshold for correcting load capacity information indicated on tire placards when the vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of the Gross Vehicle Weight Rating or 45.4kg (100 pounds). If the total added weight exceeds the lesser of the limit, a label (See Figure 1) must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Body and frame, Equipment and accessories, Labels and manuals
| GENESIS G80 | 2018 |
|---|---|
| GENESIS G90 | 2018 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 21-BD-001G | 2024-04-11. Service bulletin. Genesis applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint. |
|---|---|
| 19-BD-001HG | 2024-04-11. Service bulletin. This bulletin provides the procedure to repair the panoramic sunroof creaking noise originating from the panoramic moving glass assembly. Applicable |
| 23-BD-007H | 2023-05-04. Service bulletin. Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint. |
| 21-BE-013HG | 2021-10-08. Service bulletin. This bulletin describes the procedure to variant code the Genesis Sedan (DH) navigation system. A black/blank screen or black and white image may be displayed from the rear view camera after the navigation unit is replaced without performing this variant coding procedure. |
| 21-EM-004H | 2021-04-07. Service bulletin. This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps. |
| 21-BR-002HG | 2021-04-07. Service bulletin. This bulletin provides best practice recommendations when performing brake service procedures. |
| 21-01-014HG | 2021-04-07. Service bulletin. This TSB describes the procedure to update the TCU to revise the diagnosis logic for OBD communication test. |
| 21-EM-003H | 2021-04-06. Service bulletin. This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below. |
| 20-EM-003HG | 2020-12-08. Service bulletin. Certain G80 and G90 Genesis vehicles may experience DTC code P0597 for “Thermostat Heater Control Circuit/Open”. This bulletin provides information on replacing the electric thermostat. No drivability issues are associated with this condition. |
| 20-DS-002HG | 2020-10-08. Service bulletin. The bulletin describes the procedure to measure and set propeller shaft angles to optimize driveline vibration performance on certain 2017-2018MY 3.8L AWD G80 (DH) vehicles. |