Service bulletin REV1-P8309_P8310
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10158446 |
| Published by NHTSA | 2019-04-15 |
| Manufacturer's number | REV1-P8309_P8310 |
| Manufacturer's date | 2019-03-22 |
| NHTSA component | EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; AIR BAGS |
NHTSA's summary
Driver and Passenger Air Bag Inflator Field Quality Parts Collection Initiative UPDATE March 22, 2019 Please discard ealier versions of this bulletin. The announcement from August 3, 2018 has been revised to include: o This collection initiative has been expanded to include certain MY2009-10 370Z (Z34) vehicles in Zone A (Florida and Georgia) and Zone C (New York)
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Air bags, Equipment and accessories, Labels and manuals
| NISSAN 370Z | 2009, 2010 |
|---|---|
| NISSAN CUBE | 2009, 2010 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2026184 | 2026-04-09. Airbag |
|---|---|
| 26V230000 | 2026-04-09. AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE |
| 2010235 | 2010-07-16. Airbag |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| NTB10-073B | 2026-05-30. Service campaign. VOLUNTARY SERVICE CAMPAIGN 2009-2010 CUBE; PASSENGER SIDE CURTAIN AIR BAG CAMPAIGN ID # P0335 is no longer active. · Repair orders opened after this bulletin’s published date are no longer eligible for reimbursement under Campaign ID # P0335. · Discard all previous versions of NTB10-073. |
|---|---|
| NTB19-071D | 2024-10-22. Service bulletin. DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. IF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored, AND OCS zero point reset cannot be performed, (continued on the next page) |
| NTB19-071C | 2023-04-10. Service bulletin. DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| NTB19-071B | 2022-06-03. Service bulletin. DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| NTB11-073B | 2021-09-08. Service bulletin. VOLUNTARY SERVICE CAMPAIGN CALL WAITING FUNCTION NAVIGATION UPDATE Service Campaign ID # P1234 is no longer active. • Repair orders opened after this bulletin’s published date are no longer eligible for reimbursement under Campaign ID # P1234. • Discard all previous versions of NTB11-07 |
| NTB11-057A | 2021-08-06. Service bulletin. VOLUNTARY SERVICE CAMPAIGN 2009 cube® VEHICLE NO START DUE TO ELECTRONIC STEERING COLUMN LOCK (ESCL) Service Campaign ID # P1225 is no longer active. • Repair orders opened after this bulletin’s published date are no longer eligible for reimbursement under Campaign ID # P1225. • Discard all previous versions of NTB11-057. |
| NTB16-024 | 2021-05-24. Service bulletin. 370Z; 4-Piston front caliper brake Judder |
| NTB15-044B | 2021-05-24. Service bulletin. Fuel Filler Cap tether clip service information |
| NTB11027B | 2021-05-10. Service bulletin. SERVICE INFORMATION Temporary tire Flat Spotting is common on New Dealer In-Stock vehicles that have not been occasionally moved. Flat Spotting can occur after the vehicle has been parked (not moved) for a few days, or longer. In most cases it is temporary. In extreme cases it can be permanent. Vehicles should be moved every 30 days, in one direction only, enough to rotate the tires 90° (see Figure 1). Moving vehicles as shown will prevent tire Flat Spotting. See this bulletin for further detail. |
| NTB09099A | 2021-05-10. Service bulletin. IF YOU CONFIRM A refrigerant leak at a refrigerant pipe/hose joint location. ACTIONS 1. Inspect the metal surfaces of the pipe/hose joint for damage or contamination. NOTE: Do not replace a refrigerant pipe, hose, or other A/C component if an o-ring seal will solve the leak incident, if it should occur. 2. If no damage is found to the joint metal surfaces, replace the O-ring seal. See this bulletin for further detail. |