Service bulletin B310112
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10147715 |
| Published by NHTSA | 2018-11-13 |
| Manufacturer's number | B310112 |
| Manufacturer's date | 2015-06-01 |
| NHTSA component | SUSPENSION |
NHTSA's summary
Clicking Noise from Front Axle. Clicking noises are heard from the front axle area while maneuvering at low speeds (e.g., parking lot maneuvers). CAUSE Movement between the contact surfaces of the wheel bearing and swivel bearing (knuckle)
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Suspension
| BMW 1 SERIES M | 2011 to 2013 |
|---|---|
| BMW 525D XDRIVE | 2014 |
| BMW 528I | 2011, 2012, 2013, 2014, 2015, 2016 |
| BMW 535D | 2014, 2015, 2016 |
| BMW 535I | 2011, 2012, 2013, 2014, 2015, 2016 |
| BMW 535I GRAN TURISMO | 2010, 2011, 2012 (the catalog's model; the bulletin names a series or trim of it) |
| BMW 535I US | 2011 (the catalog's model; the bulletin names a series or trim of it) |
| BMW 550I | 2011, 2012, 2013, 2014, 2015, 2016 |
| BMW 550I GRAN TURISMO | 2010, 2011, 2012 (the catalog's model; the bulletin names a series or trim of it) |
| BMW 640I | 2012, 2013, 2014, 2015, 2016 |
| BMW 650I | 2012, 2013, 2014, 2015, 2016 |
| BMW 740I | 2012, 2013, 2014, 2015 |
| BMW 740I US | 2011 (the catalog's model; the bulletin names a series or trim of it) |
| BMW 740LD | 2015 |
| BMW 740LI | 2011, 2012, 2013, 2014, 2015 |
| BMW 750I | 2009, 2010, 2011, 2012, 2013, 2014, 2015 |
| BMW 750LI | 2009, 2010, 2011, 2012, 2013, 2014, 2015 |
| BMW 760LI | 2010, 2011, 2012 |
| BMW 760LI | 2014, 2015 |
| BMW ACTIVE HYBRID 3 | 2012 |
| BMW ACTIVE HYBRID 3 | 2015 |
| BMW ACTIVE HYBRID 5 | 2013 |
| BMW ACTIVE HYBRID 7 | 2012 |
| BMW ACTIVE HYBRID 7 | 2014 |
| BMW ACTIVEHYBRID 7 | 2011 |
| BMW M5 | 2013, 2014, 2015, 2016 |
| BMW M6 | 2013, 2014, 2015, 2016 |
| BMW X5 | 2014, 2015, 2016 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| B010522 | 2026-03-31. Warranty extension. THE FRONT AND REAR AIR SUSPENSION STRUT ASSEMBLIES LIMITED WARRANTY FOR DEFECTS IN MATERIALS OR WORKMANSHIP HAS BEEN EXTENDED TO 8 YEARS /80,000 MILES AS DETERMINED FROM THE ORIGINAL IN-SERVICE DATE. |
|---|---|
| SIB010522 | 2022-08-22. Service bulletin. Component-Specific Limited Warranty Extension For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle's front and rear air suspension strut assemblies (item # 1 Front and # 2 Rear, shown) to: 8 years/80,000 miles, as determined by the vehicle's original in-service date. Other air suspension system-related components/issues are excluded from this coverage. This component-specific limited warranty extension applies to defects in materials or workmanship. This coverage is subject to the same vehicle eligibility requirements, limitations, and exclusions that apply to the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks. |
| B340515 | 2020-12-21. Service bulletin. TICKING NOISE FROM THE FRONT AXLE WHEN CORNERING: The customer may complain of a metallic ticking noise from the front axle, when cornering, maneuvering, parking or pulling away from a parking space. |
| B310112 | 2020-09-14. Service bulletin. CRACKING NOISES FROM THE FRONTAXLE AREA WHILE TURNING THE WHEELS, WHEN STATION: Cracking noises are heard from the front axle area while maneuvering at low speeds (e.g., parking lot maneuvers) or when turning the steering wheel while stationary. |
| B610920 | 2020-04-20. Service bulletin. CHECK CONTROL MESSAGES FOR BRAKE SUSPENSION AND AIR BAG SYSTEM MALFUNCTION: Multiple check control messages (CCM) can display for brake suspension and air bag system malfunction. The customer may also complain about any of the following: Engine can no longer be switched off Drive position (D) cannot be engaged on the gear selector switch (GWS) Reduction of steering assist After an engine emergency shut-off (either a prolonged long press; or 3 consecutive short presses of the Start/Stop button) and the vehicle going to sleep (identifiable by the lighting of the "Start/Stop button") everything resumes normal functionality and the CCM messages no longer appear. |
| B310514 | 2019-10-21. Service bulletin. Front Suspension Ride Height Has Dropped: The front suspension ride height has dropped on one or both sides due to overload. This is caused by driving over obstacles (e.g. potholes) or an impact severe enough for the front spring strut damper to slip through the clamp of the steering knuckle. |
| B370115 | 2019-04-08. Service bulletin. Service Action: Replace Left Rear Air Spring. Torsional stress can cause the threaded fabric of the left air spring bellow to rupture and lose its airtightness. If the air spring is not airtight, the vehicle will lean on one side. |
| B370115 | 2019-04-01. Service bulletin. Service Action: Replace Left Rear Air Spring. Torsional stress can cause the threaded fabric of the left air spring bellow to rupture and lose its airtightness. If the air spring is not airtight, the vehicle will lean on one side. |
| B370215 | 2018-12-10. Service bulletin. "The ""Variable Damper Control"" (VDC) valves for the spring strut shock absorber on the left front axle may fail, causing the Check Control message: ""Chassis function restricted. It is possible to continue driving. Have the system checked as soon as possible by your local BMW Service Workshop"" to be displayed." |
| B370214 | 2018-12-10. Service bulletin. Service Action: Program Variable Damper Control (VDC) Unit. Unfavorable tolerances for the plug-in connections of the wheel acceleration sensors may result in fault code memory entries and the VDC being deactivated. If the VDC control unit identifies an implausable value from one of the wheel acceleration sensors, the VDC will be deactivated and the driver is informed by a Check Control message. The vehicle then defaults to the conventional suspension. |