Service bulletin NTB18-047

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
Type	Service bulletin
NHTSA id	10143138
Published by NHTSA	2018-07-23
Manufacturer's number	NTB18-047
Manufacturer's date	2018-06-28
NHTSA component	EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT

NHTSA's summary

2018 ROGUE SPORT; MIL ON WITH A/F RATIO SENSOR DTC(S) IF YOU CONFIRM The MIL is ON with one or more of the following Air/Fuel (A/F) Sensor DTCs stored: - P015A - A/F SENSOR1 (B1) (O2 sensor delayed response - rich to lean bank 1 sensor 1) - P015B - A/F SENSOR1 (B1) (O2 sensor delayed response - lean to rich bank 1 sensor 1) and There are no drivability issues. ACTION 1. Refer to step 6 in the SERVICE PROCEDURE to confirm this bulletin applies to the vehicle you are working on. If this bulletin applies: 2. Reprogram the ECM.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Equipment and accessories, Software

Trouble codes named

P015A, P015B

Vehicles listed
NISSAN ROGUE	2018

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
NTB20-075	2020-11-09. Service bulletin. SOFTWARE UPDATE POP-UP NOTIFICATION SERVICE INFORMATION The infotainment system of the applied vehicle has the ability to update its software through an over-the-air (OTA) link. As software updates become available for new features, and/or patches, the software update screen (pop-up) shown in Figure 1 will automatically be displayed. Much like cell phone and computer updates, this is a normal feature which allows the user to choose when an update is downloaded. • It is recommended that while in dealer inventory and this pop-up appears, that “ Yes” is selected to provide the latest software version to the customer at delivery. NOTE: If the ignition is turned OFF in the middle of a download, it will automatically restart when the ignition is turned back ON. When one of the following is selected: Yes…..The pop-up is hidden and the download starts in the background. Later…The pop-up is hidden and displayed again in the next key cycle (after cold start).
NTB19-067c	2020-07-10. Service bulletin. SOFTWARE UPDATE FOR INFOTAINMENT ISSUES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB19-067b	2019-10-09. Service bulletin. SOFTWARE UPDATES FOR INFOTAINMENT ISSUES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB19-067a	2019-10-09. Service bulletin. SOFTWARE UPDATES FOR INFOTAINMENT ISSUES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB19-067	2019-10-09. Service bulletin. SOFTWARE UPDATES FOR INFOTAINMENT ISSUES SERVICE INFORMATION When diagnosing an infotainment issue, always confirm that the latest software is installed in the AV unit before starting the diagnosis. The software updates in the following Service Procedure are for the items below: • Stability improvements and bug fixes • System enhancements that will allow future Over-The-Air (OTA) updates. Without these software updates, future OTAs will not be possible. Refer to step 5 on page 5 to confirm that this bulletin applies. HINT: The update software only needs to be downloaded once and can then be used on multiple Applied Vehicles until other infotainment software is loaded onto the USB drive to overwrite the original data.
NTB17-111d	2019-10-08. Service bulletin. NISSANCONNECT OVER THE AIR SOFTWARE UPDATE This bulletin has been superseded by NTB19-067. Please discard previous versions of this bulletin.
NTB15-049r	2019-02-19. Service bulletin. TELEMATICS SERVICE INFORMATION This bulletin applies only to vehicles equipped with a Telematics Communication Unit (TCU). This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB17-111c	2018-11-26. Service bulletin. NISSANCONNECT OVER THE AIR SOFTWARE UPDATE This bulletin has been amended. The APPLIED VEHICLES section has been revised. No other changes have been made. Please discard all previous versions of this bulletin.
P8327 Radar Sens	2018-11-19. Service bulletin. Radar and/or Advanced Drive Assist System (ADAS) Reprogram *** Quality Action Summary * Nissan is conducting a quality action to reprogram the Laser Radar and Advanced Drive Assist System (ADAS) software the on specific MY2018 Rogue (T32) and MY2018 Rogue Sport (J11) vehicles built in the Kyushu manufacturing plant. These vehicles are either currently in dealer inventory or assigned and in transit to the dealer. The software update is designed to help improve the performance of Automatic Emergency Braking (AEB) and Intelligent Forward Collision Warning (I-FCW) systems in the affected vehicles. * What Dealers Should Do *** 1. Verify if vehicles are affected by this quality action using Service Comm or National Service History ? Open Campaign I.D. P8327. - New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information - Please continue to check newly arriving inventory for campaign applicability. 2. Use the attached procedure to reprogram the Laser Radar and/or Advanced Drive Assist System (ADAS) control unit software. 3. Dealers are requested to remedy any affected vehicle in dealer new inventory prior to sale to ensure customer satisfaction. Thank you for your prompt attention to this matter. NISSAN NORTH AMERICA, INC. Aftersales DIVISION
NTB17-111b	2018-10-15. Service bulletin. 2018 ROGUE; NISSANCONNECT OVER THE AIR SOFTWARE UPDATE This bulletin has been amended. Steps to check for additional software updates have been added. Please discard all previous versions of this bulletin.