Service bulletin 18-009-13
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10138998 |
| Published by NHTSA | 2018-06-04 |
| Manufacturer's number | 18-009-13 |
| Manufacturer's date | 2013-02-22 |
| NHTSA component | POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM |
NHTSA's summary
Flash: MIL Illumination P1004 - Short Runner Valve Control Performance This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Code (DTC) has been set: P1004 - Short Runner Valve Control Performance
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, Transmission and driveline, Automatic transmission, Transmission control module
Trouble codes named
P1004
| DODGE RAM 2500 | 2012 (the catalog's model; the bulletin names a series or trim of it) |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 17V821000 | 2017-12-20. POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:COLUMN SHIFT |
|---|---|
| 13V344000 | 2013-08-06. POWER TRAIN:AUTOMATIC TRANSMISSION |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| S1709000010 | 2023-01-09. Service bulletin. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary. |
|---|---|
| V51 | 2022-12-19. Service bulletin. Customer Satisfaction Notification V51 Reprogram Powertrain Control Module |
| V51 | 2020-01-21. Service bulletin. Customer Satisfaction Notification V51 Reprogram Powertrain Control Module |
| 68211004A | 2018-11-26. Service bulletin. Shifter - Automatic Trans Before this part is replaced for any issue please call John Grzecki on cell (248) 379- 0969. If you do not receive a return call within 15 minutes, proceed with the repair. Please be sure to accurately record any DTCs identified with the scan tool and document them on the repair order. |
| 18-050-14 REV. A | 2018-06-11. Service bulletin. Flash: Drone or Vibration Present During MDS Operation This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. New PCM software is being released to address a customer's concern of a drone or vibration type condition while driving at highway speeds during MDS (Multiple Displacement System) operation.In addition, the following powertrain system improvements/enhancements are also included in this software release: Improved Electronic Voltage Regulator control to more precisely maintain system voltage. Enhanced Automatic Oil Change Indicator(EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. (Only applies to vehicles using a block heater in ambient temperatures greater than -20°F(-29°C)). |
| 18-012-14 | 2018-05-21. Service bulletin. Flash: Malfunction Indicator Lamp (MIL) Illumination. Includes Various Driveability Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Codes have been set: ? P0300 - Multiple Cylinder Misfire NOTE: The P0300 improvement only applies to vehicles using a block heater in ambient temperatures greater than -20°F(-29°C). ? P2008 - Short Runner Valve (SRV) Control Circuit ? P1004 - Short Runner Valve Control Performance ? P2016 - Intake Manifold Runner Position Sensor Circuit Low ? P2017 - Intake Manifold Runner Position Sensor Circuit High ? P0456 - Evap System Small Leak Customers may also experience any of the following conditions (applies only to vehicles equipped with a CNG engine): ? Excess gasoline mode operation under normal operating conditions (switching to gasoline mode too often) ? Slight hesitation on initial acceleration when starting in gasoline mode ? Engine speed fluctuation on first gasoline to CNG mode transition under extremely low ambient temps |
| 18-009-13 | 2018-02-21. Service bulletin. Flash: MIL Illumination P1004 - Short Runner Valve Control Performance This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Code (DTC) has been set: P1004 - Short Runner Valve Control Performance |