WenmarOpen by Wenmar Pro

Service bulletin 19-002-14

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10136952
Published by NHTSA2018-05-21
Manufacturer's number19-002-14
Manufacturer's date2014-02-13
NHTSA componentVISIBILITY; POWER TRAIN; STEERING

NHTSA's summary

Steering Column Squeak / Moan While Turning Wheel This bulletin involves removing/installing the steering column, removing/installing the bulkhead pass through boot, removing the wiper seal, and applying lubricant to the intermediate shaft bearing sleeve. Customer may describe a squeak and/or moan noise while turning the steering wheel. Noise can be heard both while vehicle is stationary or while driving. Noise is typically more noticeable during cold temperatures and may go away when vehicle warms up.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Glass, wipers and mirrors, Steering, Transmission and driveline

Vehicles listed
CHRYSLER 3002014
DODGE CHALLENGER2014
DODGE CHARGER2014

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
20170812017-02-15. Powertrain
17V0970002017-02-14. POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT
20161842016-04-26. Powertrain
16V2400002016-04-25. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
S2621000003 REV.A2026-03-18. Service bulletin. The vehicle will exhibit a service transmission/check engine warning indicator for the following transmission models: 845RE, 8HP45, 850RE, 8HP50, 8HP70, 8HP75, 8HP75-PHEV, 8HP75-LCV, 8HP90, 8HP95. Transmissions may exhibit the following diagnostic codes: P07E4, P1DB2, P0716, P1B14, P0733, P1D90, P1DB7, P1B13.
24008142023-02-21. Service bulletin. HVAC Blower Intermittently Cuts out When Set On High
1900414-12023-02-21. Service bulletin. Excess Leather On The Steering Wheel
19004142023-02-21. Service bulletin. Excess Leather On The Steering Wheel
18037142023-02-21. Service bulletin. 6.4L Powertrain Diagnostic And System Improvements For MIL Illumination
21030142023-01-17. Service bulletin. Transmission Quick Learn Procedure
2100314a2023-01-17. Service bulletin. Flash: 845RE Transmission Shift Enhancements, 2-1 Downshift This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. The following TCM calibration improvements are available for vehicles equipped an 845RE Automatic Transmission (Sales Code DFL). These updates are listed by vehicle and engine.LD and LX vehicles equipped with a 3.6L engine (Sales Code ERB) Software to correct a harsh bump feel during a 2-1 downshift. Software to enable the scan tool based transmission ?Quick Learn.? Software to address customer concerns of Malfunction Indicator Lamp (MIL) illumination and Diagnostic Trouble Code (DTC) P215C Output Shaft Speed, Wheel Speed Correlation setting on AWD equipped vehicles.LX and WK vehicles equipped with a 3.0L engine (Sales Code EHD) Software to correct a harsh bump feel during a 2-1 downshift.WK vehicles e
21012142023-01-17. Service bulletin. Transmission Shift Enhancements - Adaptation Drive Learn Procedure
18027142023-01-17. Service bulletin. Powertrain System Improvements/Enhancements
S22030000032023-01-09. Service bulletin. Proper Front Driveshaft Universal Joint (U-joint) Inspection Procedures For All Wheel Drive (AWD) Vehicles.