WenmarOpen by Wenmar Pro

Service bulletin PC554

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10120573
Published by NHTSA2017-10-25
Manufacturer's numberPC554
Manufacturer's date2017-07-13
NHTSA componentAIR BAGS

NHTSA's summary

Passenger Inflator Field Quality Parts Collection Initiative (New York Only) Update ***** Collection Initiative Summary ***** Nissan launched a special parts collection activity on May 10, 2017 to replace the front passenger Takata air bag inflators free of charge on specific MY2013 Altima (L33) vehicles registered in state of New York. NOTE: Customers were informed that this parts collection activity was timelimited. Nissan communicated this activity would end once a sufficient number of in-use inflators had been collected. Nissan has collected the sufficient number of parts for this particular zone (PC554) and will now close the initiative. Nissan wants to inform dealers that PC554 will conclude on July 13, 2017. The parts collection initiative will continue until July 13, 2017 in order to allow dealers sufficient time to complete any previously scheduled repairs. Dealers should not schedule any new appointments for this activity. DBS SVC ordering has been shutoff for new part orders for PC553, PC554, PC555, and PC556. If dealers require parts for a previously scheduled repair on one of these collection activities, please obtain parts from another dealer. ***** What Dealers Should Do**** 1. Service Comm will deactivate PC554 on any unrepaired VINs on July 13, 2017. Dealers should only complete previously scheduled appointments at this time and not continue to complete or schedule additional vehicles. 2. Dealers should submit any open claims for this collection activity by July 13, 2017. 3. Dealers may continue to use NTB17-048 to service any previously scheduled vehicles subject to this activity until July 13, 2017.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Air bags

Vehicles listed
NISSAN ALTIMA2013

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
16V9110002016-12-19. AIR BAGS:SENSOR:OCCUPANT CLASSIFICATION
20166302016-12-15. Airbag
16V2440002016-04-26. AIR BAGS:SENSOR:OCCUPANT CLASSIFICATION
20154912015-10-20. Airbag
15V6810002015-10-20. AIR BAGS:SENSOR:OCCUPANT CLASSIFICATION; AIR BAGS:FRONTAL
20140932014-03-25. Airbag
14V1380002014-03-25. AIR BAGS:FRONTAL; ELECTRICAL SYSTEM:SOFTWARE
20130792013-03-14. Airbag
13V0690002013-03-01. AIR BAGS

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
NTB19-071D2024-10-22. Service bulletin. DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. IF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored, AND OCS zero point reset cannot be performed, (continued on the next page)
NTB19-071C2023-04-10. Service bulletin. DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB19-071B2022-06-03. Service bulletin. DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB00042D2021-05-10. Service bulletin. SERVICE INFORMATION Changes or modifications to the front seat assembly trim materials may affect the proper operation of the Front Seat-Mounted Side-Impact Supplemental Air Bags and Passenger Occupant Classification Sensor and could result in serious personal injury or death. Nissan STRONGLY RECOMMENDS AGAINST making any change to seat trim materials from the factory equipped condition. This specifically applies to replacing the seat trim with non-factory materials; adding leather/cloth seat covers, seat pads, or seat storage pouches, etc. around or over the seat back and the passenger seat cushion. See this bulletin for further detail.
NTB141112021-05-10. Service bulletin. SERVICE INFORMATION The OCS (Occupant Classification System) sensors for the Applied Vehicles are now available as service parts. See this bulletin for further detail.
NTB08055C2021-05-10. Service bulletin. SERVICE INFORMATION Information necessary to service the Supplemental Restraint System (SRS) safely is included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each vehicle. IMPORTANT: Turn the ignition switch OFF, disconnect both battery terminals, and wait at least 3 minutes before performing any service on the SRS. See this bulletin for further detail.
NTB130072021-05-10. Service bulletin. SERVICE INFORMATION If you confirm there is a need to replace the steering wheel switches on an Applied Vehicle for any reason: - Do not replace the driver air bag module. The steering wheel switches are now available as a separate service part. - Refer to the Service Procedure in this bulletin for steering wheel switch removal and installation instructions. See this bulletin for further detail.
NTB130592021-05-10. Service bulletin. IF YOU CONFIRM: The Malfunction Indicator Light (MIL) is "ON" with DTC P062F (Internal Control Module EEPROM Error) stored in the Transmission Control Module (TCM). and " No drivability symptoms are present. ACTION: 1. Refer to step 6 in the SERVICE PROCEDURE to confirm this bulletin applies to the vehicle you are working on. 2. If this bulletin applies, reprogram the TCM. See this bulletin for further detail.
NTB130492021-05-10. Service bulletin. SERVICE INFORMATION If the door mirror corner finisher of either front door has to be removed or replaced for any reason, make sure to remove it as noted in the picture (see bulletin). NOTE: The front door finisher must be removed prior to door mirror corner finisher removal. Refer to the L DRIVER CONTROLS>MIR Mirrors section of the Electronic Service Manual (ESM). See this bulletin for further detail.
NTB130132021-05-10. Service bulletin. IF YOU CONFIRM: DTC C1197 is stored in the ABS actuator and electric unit (ABS control unit). NOTE: The brake warning light may be on. ACTION: 1. Refer to page 4, step 8 in the SERVICE PROCEDURE to confirm this bulletin pertains to an applied vehicle that you are working on. 2. If this bulletin applies, reprogram the ABS control unit.