Service bulletin 09-047-16-3230
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10092522 |
| Published by NHTSA | 2017-02-22 |
| Manufacturer's number | 09-047-16-3230 |
| Manufacturer's date | 2016-08-11 |
| NHTSA component | LATCHES/LOCKS/LINKAGES |
NHTSA's summary
SOME VEHICLES MAY EXHIBIT THE REAR CONSOLE LID (A) THAT DOES NOT LATCH CLOSE DUE TO A BROKEN LATCH (B). THE LATCH MAY BE BROKEN BY EXCESSIVE EXTERNAL FORCE APPLIED TO THE LID. TO ELIMINATE THE CONCERN, THE SHAPE OF THE REAR CONSOLE LID LATCH HAS BEEN CHANGED TO INCREASE THE STRENGTH.
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Latches and locks
| MAZDA MAZDA3 | 2014, 2015 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| SA-050-22 | 2022-09-06. Service bulletin. Some customers may complain that their liftgate does not open. This can mean a range of things, from the liftgate not unlatching to the power liftgate (PLG) not opening automatically. If you confirm that the customer's concern is that the liftgate does not unlatch correctly, follow the repair information below |
|---|---|
| 0901116 | 2022-06-06. Service bulletin. CORROSION AROUND SPOT WELDS IN TRUNK OPENING. |
| 09-012-15-3035 | 2017-05-19. Service bulletin. SOME VEHICLES MAY EXHIBIT THE REAR CONSOLE LID (A) NOT BEING ABLE TO LATCH DUE TO A BROKEN LATCH (B). THE LATCH MAY BE BROKEN BY EXCESSIVE EXTERNAL FORCE APPLIED TO THE LID. TO CORRECT THE PROBLEM, THE REAR CONSOLE LID LATCH HAS BEEN CHANGED TO INCREASE THE STRENGTH. |
| 09-040-14-2961 | 2017-05-08. Service bulletin. SOME VEHICLES MAY EXHIBIT A BUZZING NOISE FROM THE DRIVER’S SIDE DASHBOARD WHEN DRIVING ON A ROUGH ROAD. THIS NOISE MAY BE CAUSED BY THE HOOD RELEASE INNER WIRE CONTACTING THE OUTER CABLE. TO CORRECT THE PROBLEM, THE CON-FIGURATION OF THE HOOD RELEASE CABLE HAS BEEN CHANGED. |
| 09-044-16-3227 | 2017-02-15. Service bulletin. SOME VEHICLES MAY EXHIBIT A CONDITION IN EXTREMELY COLD TEMPERATURES (BELOW FREEZING) WHERE THE HATCHBACK WILL NOT LATCH (HALF LATCH) WHEN CLOSING. THIS IS CAUSED BY THE STOPPER RUBBER, A COMPONENT OF THE LIFTGATE LATCH AND LOCK ACTUATOR (A), HARDENING WHEN THE TEMPERATURE DROPS BELOW FREEZING. THE STOPPER RUBBER HAS NOW BEEN IMPROVED TO ELIMINATE THIS CONCERN. |