Service bulletin 2038981
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10070366 |
| Published by NHTSA | 2016-06-13 |
| Manufacturer's number | 2038981 |
| Manufacturer's date | 2014-11-24 |
| NHTSA component | WHEELS |
NHTSA's summary
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Wheels
| VOLKSWAGEN PASSAT | 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 |
|---|---|
| VOLKSWAGEN PASSAT WAGON | 2001, 2002, 2003, 2004 (the catalog's model; the bulletin names a series or trim of it) |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| TT501401 | 2023-07-10. Service bulletin. The use of tire dressing gives your tires that shiny finish that completes the image of a clean (new) vehicle. There are many different tire dressing products available. When choosing a product please pay close attention to its contents. Always use a water based product. |
|---|---|
| TT451301 | 2023-07-10. Service bulletin. After replacing a Bosch 5.7 ABS module, refer to the table below to determine correct module coding value based on vehicle PR codes. Listed login code must be entered under Access/authorization before coding is attempted. After completing coding, G85 steering angle sensor basic settings must be performed before cycling key. To perform G85 basic settings manually in Vehicle self-diagnosis (VAS PC) or Control Module OBD (ODIS), start by entering access/authorization code 40168. After code is accepted, turn steering wheel 1 turn left and back to center, one turn right, and then center steering wheel. Select basic settings and enter group 1. Once display changes to ?Sensor OK? or ?Calibration OK?, basic settings have been completed. Cycle key OFF and then back ON. Clear faults to verify repair. |
| TT4506122 | 2023-07-05. Service bulletin. Use the following procedure to diagnose active wheel speed sensor complaints: |
| TB501402 | 2023-06-26. Service bulletin. Front Fender - Corrosion on Wheel Arch |
| TB501401 | 2023-06-26. Service bulletin. Front Fender - Corrosion on Wheel Arch |
| TB501603 | 2023-05-22. Service bulletin. Corrosion on wheel arch. |
| TT 45-06-122 | 2017-11-08. Service bulletin. Tech Tips (Active Wheel Speed Sensor Diagnosis): This document informs of a procedure to diagnose active wheel speed sensor complaints |
| V501401 2038981 | 2017-11-08. Service bulletin. Technical Bulletin (Front Fender - Corrosion on Wheel Arch): The wheel liner touches the arch area of the fender and rubs off the paint in the contact area. The corrosion is caused by dirt accumulations and movements of the wheel liner. The document informs how to identify affected parts. It then gives direction on servicing the issue |
| TT 45-06-122 | 2017-10-31. Service bulletin. Tech Tips (Active Wheel Speed Sensor Diagnosis): This document informs of a procedure to diagnose active wheel speed sensor complaints. |
| V501603 2038981 | 2017-10-31. Service bulletin. Document discusses issues with The wheel liner touches the arch area of the fender and rubs off the paint in the contact area. The corrosion is caused by dirt accumulations and movements of the wheel liner. It discusses how to service the corrosion issue, and how to document it |