WenmarOpen by Wenmar Pro

Service bulletin 18-060-14REV.C

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10057228
Published by NHTSA2015-05-01
Manufacturer's number18-060-14REV.C
Manufacturer's date2014-12-16
NHTSA componentELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION

NHTSA's summary

DODGE 2014-2015 JEEP CHEROKEE: DUE TO UPGRADED NEW REVISIONS OF REPROGRAMMING AND ERASING SOFTWARE FOR POWERTRAIN CONTROL MODULE (PCM). *LJ UPDATED 05/01/15. *LJ

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Electrical system, Transmission and driveline, Automatic transmission, Software

Vehicles listed
JEEP CHEROKEE2014, 2015

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
20V3430002020-06-11. POWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT; POWER TRAIN:AUTOMATIC TRANSMISSION
19V4470002019-06-13. POWER TRAIN:AUTOMATIC TRANSMISSION
18V3320002018-05-17. ELECTRICAL SYSTEM:SOFTWARE; VEHICLE SPEED CONTROL:CRUISE CONTROL; ELECTRICAL SYSTEM:WIRING
16V5290002016-07-12. POWER TRAIN:AUTOMATIC TRANSMISSION

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
S23250000072024-01-08. Service bulletin. MIL/check engine lamp comes on after performing U90 recall PCM software update.
S23250000072023-10-30. Service bulletin. MIL/check engine lamp comes on after performing U90 recall PCM software update.
1806014-12023-02-21. Service bulletin. Diagnostic And System Improvements
21034142023-02-21. Service bulletin. 948TE 9 Speed Shift Enhancements And Quick Learn Enable
21018142023-01-17. Service bulletin. Transmission Shift and Diagnostic Enhancements
V512022-12-19. Service bulletin. Customer Satisfaction Notification V51 Reprogram Powertrain Control Module
90037832022-10-31. Service bulletin. Shifter - Automatic Transmission If a 2015 - 18MY KL ONLY is brought in with a ?Service Shifter? message on the cluster and/or the following DTCs are present indicating loss of communication with the shifter: U0103, U0103-87. Prior to beginning any repair, please call John Zbranchik at 248-576-0756 or Pablo Flores at 248-576-3972. If no reply contact Dil Weerasinha at 248-944-5967 or Jay Nagle 248-576-5657. If you are unable to contact any of the above, and all the DTCs related to loss of comm are STORED, first perform a vehicle scan with a wiTECH tool or similar and email the log to john.zbranchik@fcagroup.com and pablo.flores1@fcagroup.com. Ensure all stored DTCs in the vehicle are recorded in the log. Use the tool to clear all codes and ensure the ?Service Shifter? message does not return. If this is the first occurrence of this issue on this vehicle, do NOT replace the shifter at this time. If any DTCs related to loss of comm with the shifter are ACTIVE, a full bus log is highly desired. Please contact a regional tech representative to acquire this log. After the log is acquired, or if this is not feasible, check for loose/bent pins, spread terminals on both the male pin cavity in the shifter and the female connector from the body harness take out and all grounds. If no issues are found, replace the shifter and return it to the Quality Engineering Center (QEC).
21016162022-10-24. Service bulletin. Transmission Diagnostic And Shift Enhancements
745952022-10-17. Service bulletin. Warranty Bulletin D-21-07 (X89) Power Transfer Unit - 2014-2017 Jeep Cherokee (KL)
18031142022-09-26. Service bulletin. Flash: MIL Illumination P1239, P0298- Engine Oil Temperature Too Low Or High, P0300 Multiple Cylinder Misfire, Includes Powertrain System Improvements/Enhancements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Code has been set: P1239 - Engine Oil Temperature Too Low, set in cold ambient temperatures. P0298 - Engine Oil Temperature Too High, set in cold ambient temperatures. P0300 - Multiple Cylinder Misfire, may set at a 1-2 upshift above 6000 RPM. Possible rough idle when engaging Drive while in 4 LOW after a cold start .The following system improvements have also been included in this software release: Corrected a generic scan tool display issue regarding Mode 6 data accuracy.