WenmarOpen by Wenmar Pro

Service bulletin ITB-13-13

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10051766
Published by NHTSA2013-04-10
Manufacturer's numberITB-13-13
Manufacturer's date2013-04-04
NHTSA componentVEHICLE SPEED CONTROL:CRUISE CONTROL

NHTSA's summary

INFINTI: CRUISE CONTROL WILL NOT SET AND DTC P0605 IS STORED. IF A MALFUNCTION IN THE ASCD SYSTEM IS DETECTED, THE CRUISE INDICATOR MAY STAY ON AND THE SET INDICATOR MAY FLASH. *JS

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Throttle and cruise control

Trouble codes named

P0605

Vehicles listed
INFINITI EX352009, 2010, 2011
INFINITI FX352009, 2010
INFINITI FX352011
INFINITI FX352012
INFINITI FX502009, 2010, 2011, 2012
INFINITI G252011
INFINITI G352009
INFINITI G372009, 2010, 2011, 2012
INFINITI J302009
INFINITI JX352013
INFINITI M352009, 2010
INFINITI M35 HYBRID2012 (the catalog's model; the bulletin names a series or trim of it)
INFINITI M372011, 2012, 2013
INFINITI M37 HYBRID2011, 2012, 2013 (the catalog's model; the bulletin names a series or trim of it)
INFINITI M452009, 2010
INFINITI M562011, 2012, 2013
INFINITI M56 HYBRID2011, 2012, 2013 (the catalog's model; the bulletin names a series or trim of it)
INFINITI QX2011 to 2012
INFINITI QX42009
INFINITI QX562009, 2010, 2011, 2012, 2013

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
13V4300002013-09-26. VEHICLE SPEED CONTROL:ACCELERATOR PEDAL

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
ITB10-007B2021-06-09. Service bulletin. VOLUNTARY SERVICE CAMPAIGN 2010 EX35; INTELLIGENT CRUISE CONTROL Service Campaign ID # P0301 is no longer active. • Repair orders opened after this bulletin’s published date are no longer eligible for reimbursement under Campaign ID # P0301. • Discard all previous versions of ITB10-007.
ITB10-003A2021-06-09. Service bulletin. VOLUNTARY SERVICE CAMPAIGN 2010 QX56; INTELLIGENT CRUISE CONTROL (ICC) SENSOR Service Campaign ID # PC028 is no longer active. • Repair orders opened after this bulletin’s published date are no longer eligible for reimbursement under Campaign ID # PC028. • Discard all previous versions of ITB10-003.
ITB130272021-05-10. Service bulletin. SERVICE INFORMATION: If the BCM in an Applied Vehicle is replaced for any reason and not configured correctly, the following issue may occur - When the driver door is opened, the convertible top opens. When replacing a BCM, make sure to - Follow information in the appropriate Service Manual - Use CONSULT-III plus to perform configuration - Select the correct vehicle in CONSULT-III plus - Confirm the VIN is correct (matches the vehicle) in CONSULT-III plus - Select/install the correct configuration
ITB130122021-05-10. Service bulletin. SERVICE INFORMATION The "Lock / Unlock request buttons" that are located on the outside door handles of vehicles with Intelligent Key can be disabled (or enabled) through either the "Comfort & Conv." settings of the Audio/Visual/Navigation system, orthrough the "Combination Meter settings" depending on the vehicle model, year and trim level. NOTE: In some instances this feature may be unintentionally disabled. Please verify the status of this feature before any further diagnostic is performed. Please see this bulletin for further details.
ITB12016B2021-05-10. Service bulletin. IF YOU CONFIRM: The following incidents with The Auto Drive Position System: * Door mirrors do not go back to the original preset memory position after the vehicle is shifted into reverse, and then shifted back into drive. * Return position of mirrors drifts farther and farther from original memory preset as mirror is cycled from the drive to reverse positions (cumulative). * With vehicle in park and engine turned off, the Seat and Steering Wheel do not move when exiting vehicle. ACTION: Replace Left Power Seat Control Unit with new part listed in PARTS INFORMATION in this bulletin. See this bulletin for further details.
ITB120712021-05-10. Service bulletin. SERVICE INFORMATION Part of the procedure to remove the glass mirror in either door mirror of an applied vehicle has been changed. Until the related Electronic Service Manuals (ESM) are amended, use the information in this bulletin. - Other than noted, all other procedural steps in the ESM remain the same. See this bulletin for further detail.
ITB120702021-05-10. Service bulletin. SERVICE INFORMATION The "Reverse Tilt-Down" feature will move the glass on the outside mirrors downward when the gear selector is placed in the Reverse (R) position. As the mirror glass moves downward, it may reach the end of its travel. If the mirror glass reaches the end of its travel it will make a clicking noise. The clicking noise may occur once or multiple times. IMPORTANT: - The clicking noise described above is a normal function of the mirror glass movement. - Do not replace the door mirror assembly in an attempt to repair this normal function.
ITB17-0202017-08-01. Service bulletin. 2010 - 2012 FX35; MIL ON WITH DTC P0101 This bulletin applies only to vehicles equipped with V6 engine. IF YOU CONFIRM The MIL is ON with DTC P0101 (MAF SEN/CIRCUIT-B1) stored. and There are no drivability issues. ACTION Clean the throttle valve and chamber of the electronic throttle control actuator.
ITB-14-0512015-02-20. Service bulletin. INFINITI: ON SOME VEHICLES, THE FORWARD COLLISION WARNING (FCW) MALFUNCTION HAS BEEN OR IS ON AND FLUID LEVEL FOR BRAKES IS NORMAL AND THE ABS CONTROL UNIT NEEDS PROGRAMMING, PER SERVICE PROCEDURE. MODEL 2013-14 JX35, QX60, 2014-15 Q50. *PE UPDATED 9/10/15. *PE
ITB-12-0132012-04-23. Service bulletin. INFINITI: PERFORMING MILLIMETER WAVE (RADAR) SENSOR ADJUSTMENT SERVICE WILL REQUIRE A SPECIAL SERVICE TOOL KIT. *PE