Service bulletin ITB-14-051
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10056785 |
| Published by NHTSA | 2015-02-20 |
| Manufacturer's number | ITB-14-051 |
| Manufacturer's date | 2015-07-29 |
| Replaces | ITB-14-051-A |
| NHTSA component | VEHICLE SPEED CONTROL; VEHICLE SPEED CONTROL:CRUISE CONTROL |
NHTSA's summary
INFINITI: ON SOME VEHICLES, THE FORWARD COLLISION WARNING (FCW) MALFUNCTION HAS BEEN OR IS ON AND FLUID LEVEL FOR BRAKES IS NORMAL AND THE ABS CONTROL UNIT NEEDS PROGRAMMING, PER SERVICE PROCEDURE. MODEL 2013-14 JX35, QX60, 2014-15 Q50. *PE UPDATED 9/10/15. *PE
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Throttle and cruise control
| INFINITI JX35 | 2013 |
|---|---|
| INFINITI Q50 | 2014, 2015 |
| INFINITI QX60 | 2014, 2015 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 14V583000 | 2014-09-22. VEHICLE SPEED CONTROL:ACCELERATOR PEDAL; ENGINE AND ENGINE COOLING:ENGINE |
|---|
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| ITB14059A | 2021-05-10. Service bulletin. IF YOU CONFIRM All "hands free" functions of the Intelligent Key (I-Key) do not work. For example, the doors will not lock or unlock when pressing either front door request switch. NOTE: - The issue of all I-Key "hands free" functions not working may occur intermittently or all the time. - The message "No Key Detected" or similar may show on the Vehicle Information Display (located in the combination meter). - All I-Key remote button functions (door lock/unlock, etc.) WILL work normally when all I-Key "hands free" functions are NOT working. ACTION 1. Inspect the I-Key?s battery on its negative contact side. 2. If excessive scratching is found, replace the battery. 3. Verify all I-Key functions (both "hands free" and remote) work properly after battery replacement. NOTE: Do NOT replace the BCM, I-Key, or other parts for the issue described under IF YOU CONFIRM, if it should occur. See this bulletin for further detail. |
|---|---|
| ITB15028 | 2021-05-10. Service bulletin. SERVICE INFORMATION For Applied Vehicles, the rear door partition seals have been deleted. These seal are no longer a standard component and should not be considered missing and should not be installed. Do not submit a warranty claim for installation of a missing partition seal. Please see this bulletin for further details. |
| ITB15007 | 2021-05-10. Service bulletin. IF YOU CONFIRM A power window auto-up does not work for one or more power windows. ACTION Replace the left front (driver) door finisher with the new one listed in the Parts Information. While replacing the door finisher, also replace the main power window switch. See this bulletin for further detail. |
| ITB-13-13 | 2013-04-10. Service bulletin. INFINTI: CRUISE CONTROL WILL NOT SET AND DTC P0605 IS STORED. IF A MALFUNCTION IN THE ASCD SYSTEM IS DETECTED, THE CRUISE INDICATOR MAY STAY ON AND THE SET INDICATOR MAY FLASH. *JS |
| ITB-12-013 | 2012-04-23. Service bulletin. INFINITI: PERFORMING MILLIMETER WAVE (RADAR) SENSOR ADJUSTMENT SERVICE WILL REQUIRE A SPECIAL SERVICE TOOL KIT. *PE |