Transport Canada recall 2024187
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2024187 |
| Manufacturer's number | RC202 |
| Reported | 2024-03-22 |
| Component | Powertrain |
| Notification type | Safety Mfr |
| Units potentially affected | 18567 |
What is wrong
Issue:
On certain vehicles, the axle shaft(s) may not have been manufactured properly. As a result, the axle shaft(s) splines could become damaged. If this happens, the vehicle could move when it's parked and the parking brake isn't applied.
Safety Risk:
A parked vehicle that moves suddenly could create the risk of an injury or a crash.
Corrective Actions:
Kia will notify owners by mail and advise you to take your vehicle to a dealership to update the electronic parking brake software. To reduce the safety risk, Kia recommends that you should always use the parking brake when you park.
| 2020 KIA TELLURIDE | |
|---|---|
| 2021 KIA TELLURIDE | |
| 2022 KIA TELLURIDE | |
| 2023 KIA TELLURIDE | |
| 2024 KIA TELLURIDE |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| TSB_CHA129_R1 | 2026-09-30. Service bulletin. TECHNICAL SERVICE BULLETIN: AWD COUPLER NOISE/VIBRATION LOGIC IMPROVEMENT (Revision 1) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to upgrade the 4-Wheel Drive ‘4WD’ system software on some 2020-2025MY Telluride (ON) vehicles produced from January 08, 2019 through December 17, 2025. The affected vehicles may exhibit a noise and/or a vibration, shudder, jerking, binding, or chattering sensation while turning at low speeds (10MPH – 15MPH). This concern may be caused by decreased oil friction within AWD coupling due to continuous vehicle operation in harsh conditions (high/low ambient temperatures, extended duration/distance driving). |
|---|---|
| TSB_CHA128_CLSD | 2026-05-23. Service bulletin. TECHNICAL SERVICE BULLETIN: 4WD COUPLING NOISE/VIBRATION LOGIC IMPROVEMENT) - CLOSED & SUPERSEDED BY CHA129 - This bulletin is now closed and superseded by CHA129. This bulletin provides information to upgrade the 4-Wheel Drive ‘4WD’ system software on certain 2020-2022MY Telluride (ON) vehicles produced from January 09, 2019 through September 01, 2022. The affected vehicles may exhibit a noise and/or a vibration, shudder, jerking, binding, or chattering while turning at low speeds (10MPH – 15MPH) located from the 4WD coupling caused by a decrease in the oil friction of the 4WD coupling due to continuous vehicle operation in harsh conditions (high/low ambient temperatures, long time/distance traveling). |
| TSB_CHA129 | 2026-05-23. Service bulletin. TECHNICAL SERVICE BULLETIN: AWD COUPLER NOISE/VIBRATION LOGIC IMPROVEMENT - This bulletin provides information to upgrade the 4-Wheel Drive ‘4WD’ system software on some 2020-2025MY Telluride (ON) vehicles produced from January 08, 2019 through December 17, 2025. The affected vehicles may exhibit a noise and/or a vibration, shudder, jerking, binding, or chattering sensation while turning at low speeds (10MPH – 15MPH). This concern may be caused by decreased oil friction within AWD coupling due to continuous vehicle operation in harsh conditions (high/low ambient temperatures, extended duration / distance driving). |
| TSB_CHA128 | 2025-05-01. Service bulletin. TECHNICAL SERVICE BULLETIN: 4WD COUPLING NOISE/VIBRATION LOGIC IMPROVEMENT - This bulletin provides information to upgrade the 4-Wheel Drive “4WD” system software on certain 2020-2022MY Telluride (ON) vehicles produced from January 9, 2019, through September 1, 2022. The affected vehicles may exhibit a noise, vibration, shudder, and/or chattering from the 4WD coupling assembly while turning at low speeds (10-15 mph) due to continuous vehicle operation in harsh conditions (e.g., very high or low ambient temperatures). |
| TSB_TRA046_R5 | 2025-04-23. Service bulletin. TECHNICAL SERVICE BULLETIN: TRANSMISSION FLUID APPLICATION GUIDE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, and the transmission oil cooler is transferred to the new transmission. |
| TSB_TRA089_R1 | 2025-04-23. Service bulletin. TECHNICAL SERVICE BULLETIN: TCM MIL ON DTC P074100 LOGIC IMPROVEMENT - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to improve the logic of the Transmission Control Module (TCM) on some 2020MY Telluride (ON) vehicles, produced from February 6, 2019, through December 9, 2019, which may experience lack of engagement of the torque converter damper clutch with illumination of the MIL and DTC P074100. When this occurs, the vehicle retains motive power, but transmission gear change smoothness can be affected. |
| SC303Z_TSB | 2024-09-03. Service bulletin. TECHNICAL SERVICE BULLETIN: SUBSEQUENT REPAIR ACTION: RIGHT FRONT DRIVESHAFT INSPECTION AND REPLACEMENT (SC303Z) - This bulletin provides information to inspect and, if necessary, replace the right front driveshaft on certain 2020-2024MY Telluride (ON) vehicles manufactured from January 9, 2019 through October 19, 2023 that previously had the campaign SC303 completed. |
| TSB_TRA046_R4 | 2024-06-04. Service bulletin. This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced. |
| TSB_TRA105_R1 | 2024-05-06. Service bulletin. TECHNICAL SERVICE BULLETIN: 4WD COUPLING NOISE INSPECTION AND SNAP RING REPLACEMENT - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to inspect for a knocking/clicking noise present in the rear of the vehicle during low-speed driving (25MPH or less) on some 2020-2022MY Kia vehicles equipped with All Wheel Drive (AWD). The 4WD coupling snap ring may have excessive play between the drive gear set shaft and coupling flange. |
| TSB_TRA105 | 2023-12-05. Service bulletin. TECHNICAL SERVICE BULLETIN: 4WD COUPLING NOISE INSPECTION AND SNAP RING REPLACEMENT - This bulletin provides information to inspect for a knocking/clicking noise present in the rear of the vehicle during low-speed driving (25MPH or less) on some 2020-2022MY Kia vehicles equipped with All Wheel Drive (AWD). The 4WD coupling snap ring may have excessive play between the drive gear set shaft and coupling flange. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.