Transport Canada recall 2024148
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2024148 |
| Manufacturer's number | PD106 / PD107 |
| Reported | 2024-03-05 |
| Component | Seats And Restraints |
| Notification type | Compliance Mfr |
| Units potentially affected | 981 |
What is wrong
Issue:
On certain vehicles, the driver seat belt pretensioner may not have been manufactured correctly. As a result, the seat belt pretensioner may not work properly in a crash.
Safety Risk:
A seat belt pretensioner that doesn't work properly could increase the risk of injury in a crash.
Corrective Actions:
Nissan will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the driver seat belt pretensioner.
| 2024 INFINITI QX60 | |
|---|---|
| 2024 NISSAN PATHFINDER |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| ITB22-021C | 2024-10-22. Service bulletin. SERVICE INFORMATION In the APPLIED VEHICLES, there are a variety of Seat Belt Warning Lights and Chimes. Refer to the information in this bulletin, along with the related vehicle owner’s manual. Figure 1 Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti retailer to determine if this applies to your vehicle. Seat Belt Warning Light for driver and front passenger. |
|---|---|
| NTB22-032B | 2023-12-08. Service bulletin. SEAT BELT REMINDER SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB23-027 | 2023-12-08. Service bulletin. POWER FOLDING 3RD ROW SEAT SYSTEM CALIBRATION SERVICE INFORMATION Obstructions such as unfolded headrests or objects left in the vehicle may prevent the power folding 3rd row seat from returning to the upright position under power: • Verify that the 3rd row seat headrests are folded forward. o If the 3rd row seat headrests are not folded forward, the headrests can contact the 2nd row seats and prevent the power folding 3rd row seat from returning upright. • Verify that the floor between the 2nd and 3rd row seats is clear of any obstructions. o If there are obstructions on the floor, clear the obstructions and try to move the seat upright. • If the 3rd row seat headrests are folded forward and there are no obstructions, perform system calibration before attempting to replace any parts. o Refer to the ESM: BODY INTERIOR > SEAT > BASIC INSPECTION > SYSTEM CALIBRATION > Work Procedure If the power folding 3rd row seat does not return upright under power after performing system calibration, refer to the ESM for further diagnosis. |
| ITB22-021B | 2023-12-08. Service bulletin. SEAT BELT REMINDER SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| PC988 2023 QX60 | 2023-10-06. Service bulletin. Seat Frame Weld ***** Retailer Announcement ***** INFINITI is conducting a retailer inventory quality action to inspect, and if necessary replace the seat frame assembly on certain specific 2024 INFINITI QX60 vehicles identified in Service Comm and National Service History. The lower front seat cushion with 8-way power control may feel loose or emit a noise when seat cushion is adjusted to upward position using tilt feature. Please follow the attached instructions to remedy any vehicles affected by this retailer inventory quality action. ***** What Retailers Should Do ***** PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History – Open Campaign I.D. PC988 • New vehicles in retailer inventory can also be identified by using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). • Refer to IPSB 15-286 for additional information • Some vehicles may still be in transit. Please continue to check newly arriving inventory for QA applicability. 2. Use the attached procedure to remedy any vehicles affected by this quality action prior to sale. 3. Parts for this quality action are on restriction and can be ordered through DBS. 4. Once remedied, retailers should submit the applicable warranty claim for the action performed so it can be closed in Service Comm and release the vehicle for sale. ***** Retailer Responsibility ***** It is the retailer’s responsibility to check Service Comm or DBS National Service History – Open Campaign using the appropriate campaign I.D for the inspection status on each affected vehicle currently in new vehicle inventory. |
| PC987 2023 Rogue | 2023-10-06. Service bulletin. Seat Frame Weld *****Dealer Announcement***** Nissan is conducting a dealer inventory quality action to inspect, and if necessary replace the seat frame assembly on certain specific 2023 Nissan Rogue and 2023-2024 Pathfinder vehicles identified in Service Comm and National Service History. The lower front seat cushion with 8-way power control may feel loose or emit a noise when seat cushion is adjusted to upward position using tilt feature. Please follow the attached instructions to remedy any vehicles affected by this dealer inventory quality action. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History – Open Campaigns I.D. PC987 • New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). • Refer to NPSB 15-460 for additional information • Please continue to check newly arriving inventory for campaign applicability. 2. Use the attached procedure to remedy any vehicles affected by this quality action prior to sale. 3. Parts for this quality action are on restriction and can be ordered through DBS. 4. Once remedied, dealers should submit the applicable warranty claim for the action performed so it can be closed in Service Comm and release the vehicle for sale. ***** Dealer Responsibility ***** It is the dealer’s responsibility to check Service Comm or DBS National Service History – Open Campaign using the appropriate campaign ID for the inspection status on each affected vehicle currently in new vehicle inventory. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.