Transport Canada recall 2024144
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2024144 |
| Manufacturer's number | 61 01 24RC |
| Reported | 2024-03-01 |
| Component | Electrical |
| Notification type | Superseded |
| Units potentially affected | 202 |
What is wrong
This recall was replaced by Transport Canada recall no. 2024-428.
Issue:
On certain motorcycles, the starter relay may not have been sealed properly. As a result, moisture could enter the relay and cause it to overheat and melt.
Safety Risk:
A starter relay that overheats and melts could create the risk of a fire.
Corrective Actions:
None of the affected motorcycles have been delivered to customers. BMW Motorrad will instruct dealers to replace the starter relay before each motorcycle is delivered.
| 2024 BMW R1300 GS |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| MC611024 | 2024-11-25. Service campaign. After a quality inspection it has been determined moisture/water can enter the right multifunction switch andcause malfunctions. This issue does not impact vehicles with production dates of 07/01/2024 or later. |
|---|---|
| mc610824 | 2024-09-29. Service campaign. A small quantity of R 1300 GS’s and GS Adventures were assembled with a wiring harness where the relayand its new protective holder were pre-assembled using a safe process by the wiring harness supplier. Theprocess does not cause any damage during assembly. The result being these units are not required to bepart of the current ongoing recall “61 07 24 Recall 24V-557: Replace Starter Relay”. However, these units were produced with a semiconductor style starter relay and we are moving to the newelectromechanical starter relay. As of model year 2025 units in series production at the factory, the conversion to the new styleelectromechanical starter relay will be carried out. |
| MC770324 | 2024-07-01. Service bulletin. The touchscreen does not react to operation and or switches independently between displays. Caused by a leak between the screen layers. |
| MC610524 | 2024-07-01. Service bulletin. eCall failure with fault code 0xB7F334 – Provisioning: Control unit is not provisioned. Caused by a software error if a control unit reset is carried out while there is insufficient communicationreception. |
| MC230124 | 2024-05-03. Service bulletin. After setting or resetting gear position adaptation values in ISTA it appears that the procedure wassuccessful and the gears have been taught in; however, a gear adaptation value fault exists. Due to a display error, the gear indicator does not flash when the gears have not been taught, but also lights up permanently for these gears. |
| MC460224 | 2024-04-01. Service bulletin. Calibration of one or both ride height sensors fail due to the ride height sensor/s are not positioned correctly. |
| MC610224 | 2024-04-01. Service bulletin. Situation 1) Li-Ion battery is discharged below 2.5 Vdc. Situation 2) Fault stored for wrong battery installed. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.