Service bulletin MC460224
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10252136 |
| Published by NHTSA | 2024-04-01 |
| Manufacturer's number | MC460224 |
| Manufacturer's date | 2024-03-28 |
| NHTSA component | ELECTRICAL SYSTEM |
NHTSA's summary
Calibration of one or both ride height sensors fail due to the ride height sensor/s are not positioned correctly.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system
| BMW R 1300 GS | 2024 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 24V557000 | 2024-07-26. ELECTRICAL SYSTEM:STARTER ASSEMBLY:RELAY |
|---|---|
| 2024428 | 2024-07-25. Electrical |
| 2024144 | 2024-03-01. Electrical |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| MC611024 | 2024-11-25. Service campaign. After a quality inspection it has been determined moisture/water can enter the right multifunction switch andcause malfunctions. This issue does not impact vehicles with production dates of 07/01/2024 or later. |
|---|---|
| mc610824 | 2024-09-29. Service campaign. A small quantity of R 1300 GS’s and GS Adventures were assembled with a wiring harness where the relayand its new protective holder were pre-assembled using a safe process by the wiring harness supplier. Theprocess does not cause any damage during assembly. The result being these units are not required to bepart of the current ongoing recall “61 07 24 Recall 24V-557: Replace Starter Relay”. However, these units were produced with a semiconductor style starter relay and we are moving to the newelectromechanical starter relay. As of model year 2025 units in series production at the factory, the conversion to the new styleelectromechanical starter relay will be carried out. |
| MC770324 | 2024-07-01. Service bulletin. The touchscreen does not react to operation and or switches independently between displays. Caused by a leak between the screen layers. |
| MC610524 | 2024-07-01. Service bulletin. eCall failure with fault code 0xB7F334 – Provisioning: Control unit is not provisioned. Caused by a software error if a control unit reset is carried out while there is insufficient communicationreception. |
| MC230124 | 2024-05-03. Service bulletin. After setting or resetting gear position adaptation values in ISTA it appears that the procedure wassuccessful and the gears have been taught in; however, a gear adaptation value fault exists. Due to a display error, the gear indicator does not flash when the gears have not been taught, but also lights up permanently for these gears. |
| MC610224 | 2024-04-01. Service bulletin. Situation 1) Li-Ion battery is discharged below 2.5 Vdc. Situation 2) Fault stored for wrong battery installed. |