Transport Canada recall 2020450
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2020450 |
| Manufacturer's number | 20S52 |
| Reported | 2020-09-24 |
| Component | Brakes |
| Notification type | Safety Mfr |
| Units potentially affected | 2251 |
What is wrong
Issue:
On certain cars, the brake pedal bracket could fail during sudden braking. If this happens, there could be a loss of braking.
Note: This recall only affects cars with an automatic transmission.
Safety Risk:
A loss of brakes can create the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your car to a dealer to replace the brake pedal bracket assembly.
| 2020 FORD MUSTANG |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SSM 51261 | 2023-01-06. Service bulletin. Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00. |
|---|---|
| SSM 51120 | 2022-10-11. Service bulletin. Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00. |
| TSB 22-2362 | 2022-09-30. Service bulletin. Some 2020-2022 Mustang Shelby GT500 vehicles may exhibit an intermittent parking brake fault message in the instrument panel cluster (IPC) with diagnostic trouble codes (DTCs) C1034, C2005, C2006, C2007 and/or C2008 stored in the anti-lock brake system (ABS) module and/or a parking brake that sticks after being applied. This may be due to internal binding of the piston within the parking brake caliper. To correct the condition, follow the Service Procedure to replace the parking brake caliper(s). |
| SSM 50064 | 2021-09-04. Service bulletin. Some 2013-2021 Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.