Transport Canada recall 2016624
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2016624 |
| Manufacturer's number | S89 |
| Reported | 2016-12-14 |
| Component | Powertrain |
| Notification type | Safety Mfr |
| Units potentially affected | 3303 |
What is wrong
Certain vehicles may experience intermittent operation of the crankshaft or camshaft sensor. Intermittent operation of the crankshaft or camshaft sensor may result in illumination of a malfunction indicator lamp (“MIL”), the vehicle not starting or the engine stalling while driving, causing a loss of motive power which could increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the crankshaft and camshaft connector.
| 2016 DODGE JOURNEY | |
|---|---|
| 2016 JEEP COMPASS | |
| 2016 JEEP PATRIOT |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| U67 Combo Rev10 | 2023-02-13. Service bulletin. Emissions recal U67 Catalytic Converter Efficiency |
|---|---|
| U67 | 2023-01-17. Service bulletin. Some of the above-involved vehicles may exceed NOx (Oxides of Nitrogen) emission level standards due to loss of catalytic converter efficiency |
| 9004206 | 2023-01-09. Service bulletin. Remanufactured Transmission Assembly 1. All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. Only use the reman 62TE specified in StarParts for each model year - Only use R8210327A$ for 2014 - 2018 VF. - Only use R8453637A$ for 2019 VF. - Only use R8599680AA for 2020/1VF. Installing a R8453637A$ or R8599680A$ in a 2014-18 VF will result in a 2014-18 MY core being returned. Mopar can no longer convert 2014-18 VF 62TE core to the 2019-21 version. Continued mis-usage will result in a core shortage. Mopar may deny warranty claims where the incorrect version is used in 2014-18 VF. 3. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 5. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission. |
| 1804816 | 2022-10-24. Service bulletin. Powertrain Diagnostic and System Improvements |
| 1804616 | 2022-10-24. Service bulletin. Powertrain Diagnostic And System Enhancements |
| S1908000102 | 2022-10-17. Service bulletin. (Rev. A) Power Inverter Load Ratings |
| 9003615 | 2022-10-17. Service bulletin. Electronic Shifter Module (ESM) Special Notes below from previous Techtips; NOTE 1: If mismatch between shifter NIK and PRNDM occur, it may appear that the PRNDM will not light up the first time the shifter is woken up via CAN. Please wait 2 minutes 15 seconds for the PRNDM lights to come back on. This is due to a software update feature of the Shifter lower (04670682A$). During PRNDM software update, the shifter will not be functional. NOTE 2: If Shifter is awake on CAN while disconnecting PRNDM from Shifter (04670682A$), U114C-00 will activate. This is by design and does not require replacement of PRNDM. NOTE 3: PRNDM supply Voltage from Shifter will be deactivated after 3 seconds if PRNDM is disconnected from Shifter while Shifter is awake via CAN and U114C-00 will activate. Power to Shifter will have to be removed for approx.. 20 seconds after PRNDM is connected to reset power to PRNDM from the Shifter. Power can be reset by removing battery power or disconnecting the shifter main connector. This is due to a safety feature built into the Shifter that will cut power to the PRNDM if a communication error is observed between the Shifter and PRNDM. NOTE 4: If Shifter is not responsive after Dead Battery condition, Charge Battery, and once complete disconnect battery terminals for 30 seconds and reconnect. Check Shifter functionality. Please return parts back to FCA Engineering if PRNDM is deemed non-functional after performing this TECHtip. ~ |
| S1721000016 | 2022-10-17. Service bulletin. Service 4wd Light On, Message AWD System Service Required |
| 9004266 | 2022-10-17. Service bulletin. TRANSMISSION, 5 Speed On replacing OE transmission 05106567A$/68042567A$ with reman transmission R8142074A$ replace with new Hydraulic Clutch Tube 05273429A$ to avoid interference with shift lever |
| 9004265 | 2022-10-17. Service bulletin. TRANSMISSION, 5 Speed Replacing OE transmission 05106789A$/68042789A$ with reman transmission R8142073A$ replace with new Hydraulic Clutch Tube 05273429A$ to avoid interference with shift lever |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.