Transport Canada recall 2016096
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2016096 |
| Reported | 2016-02-29 |
| Component | Brakes |
| Notification type | Safety TC |
| Units potentially affected | 647 |
What is wrong
On certain vehicles, when the vehicle is parked in cold temperatures for a prolonged period of time, the relay inside the electronic brake booster may freeze. This may result in increased brake pedal effort, which could increase stopping distances, potentially resulting in a crash causing injury and/or damage property. Correction: An Electric Vehicle certified dealer will reprogram the electrically-driven Intelligent Brake Control Unit software. Note: If this condition were present, a brake warning lamp would illuminate when the vehicle is first started to alert the operator of the issue.
| 2013 NISSAN LEAF | |
|---|---|
| 2014 NISSAN LEAF | |
| 2015 NISSAN LEAF |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| NTB10-145B | 2023-04-06. Service bulletin. ABS/VDC CAN DIAGNOSIS INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
|---|---|
| P5327OL | 2021-05-10. Service bulletin. Nissan is conducting a Voluntary Service Campaign on Certain 2013-2015 LEAF vehicles to reprogram the Electrically-driven Intelligent Brake Control Unit. |
| P5327 | 2021-05-10. Service bulletin. Nissan is conducting a Voluntary Service Campaign on Certain 2013-2015 LEAF vehicles to reprogram the Electrically-driven Intelligent Brake Control Unit. |
| NTB13088A | 2021-05-10. Service bulletin. SERVICE INFORMATION This bulletin has compiled Tire Pressure Monitor System (TPMS) and Low Tire Pressure Warning System (LTPWS) information for: - Basic diagnosing of TPMS/LTPWS systems - Radio frequency interference causing a "No Data" (C1708, C1709, C1710, C1711) condition - Sensor leaks - Moving TPMS/LTPWS wheel assemblies from one vehicle to another and TPMS/LTPWS sensor registration - Air pressure changes with altitude and ambient temperatures - Aftermarket tire sealers - Aftermarket wheels - Inflating/deflating tires with TPMS/LTPWS sensors See this bulletin for further detail. |
| NTB15060 | 2021-05-10. Service bulletin. SERVICE INFORMATION When servicing run flat tires or low profile tires: - Special equipment and procedures are required to avoid damage. - Specifically, Tire Pressure Monitor transmitters (TPMS sensors) can be damaged when improperly dismounting and mounting tires. - TPMS sensors becoming damaged during mounting or dismounting tires are not covered under warranty. - To avoid such damage, ensure that the tire changer being used and the operator of the tire changer is capable of servicing run flat and low profile tires. - Operator?s manuals for such tire changers must be followed. See this bulletin for further detail. |
| NTB04094A | 2021-05-10. Service bulletin. If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut PFM Series brake lathe has been chosen as the approved tool for rotor resurfacing. - The ProCut PFM Series brake lathe can be ordered from TECH-MATE at 1-800-662-2001. - ProCut technical support or service can be obtained by calling 1-800-543-6618. NOTE: Brake rotors may need to be resurfaced during routine brake repair or for brake "judder" incidents. - Brake judder: A brake pedal pulsation and/or steering wheel shimmy when braking that occurs when there is too much thickness variation of the brake rotors (see NTB00-033). See this bulletin for further detail. |
| NTB00033E | 2021-05-10. Service bulletin. SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake incidents fall into the following categories: a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released. b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel or brake pedal when the brakes are applied. c. Pedal Feel: The effort needed to operate the brakes is too high or too low. SERVICE PROCEDURE 1. Verify the condition by road testing the vehicle with the customer. 2. Determine the specific brake incident based on the description in the Service Information above. 3. Follow the appropriate repair procedure(s), listed on the following pages, for your specific incident. See this bulletin for further details. |
| NTB-15-089 | 2015-12-01. Service bulletin. NISSAN: ELECTRICALLY DRIVEN INTELLIGENT BRAKE CONTROL UNIT, ON CERTAIN VEHICLES, NEEDS TO BE REPROGRAM. MODEL 2013-15 LEAF. *PE |
| NTB-14-017 | 2014-05-07. Service bulletin. NISSAN: THE BRAKE PEDAL MAY BE SENSITIVE AT SPEEDS BELOW 15 MPH DURING STOP AND GO TRAFFIC. THE ELECTRONICALLY DRIVEN INTELLIGENT BRAKE CONTROL UNIT MUST BE REPROGRAMMED. *JS |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.