Transport Canada recall 2011318
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2011318 |
| Manufacturer's number | SB431 |
| Reported | 2011-08-23 |
| Component | Engine |
| Notification type | Recalls Audit |
| Units potentially affected | 217 |
What is wrong
On certain Triumph Tiger 800 and Tiger 800 XC motorcycles, the engine could stall while the vehicle is decelerating. Engine stalling would result in lost vehicle propulsion which, in conjunction with traffic and road conditions, and the rider's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will update the engine management software.
| 2011 TRIUMPH TIGER 800 | |
|---|---|
| 2012 TRIUMPH TIGER 800 |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SMT-TN-163 | 2021-05-10. Service bulletin. Mudgaurd alignment, sump, crankcase breather bolts, sump plug sealing washer, seat lock, drivebelt tension, reflector mounting o-rings, water inlet cover bolt and water outlet cover bolt, bleeding the brakes, and front inner wheel, inner tube and valve. |
|---|---|
| SMT-TN-152 | 2021-05-10. Service bulletin. The torque figure for the brake line unions to the ABS modulator has changed to 15 Nm on the above models. |
| SMT-TB201-20DEC2 | 2020-01-21. Service bulletin. Technical Bulletin 200 provides instructions that apply to Steering Lock and Keys, Neutral Position Adaption, Triumph Diagnostic Tool - End of Support for Microsoft Windows 7®, Triumph Diagnostic Tool - Internet Connection and Minimum eEquipment Requirement, Torque Change, Clutch Cable, Camshaft Frame Installation, Immobiliser Antenna Wire Routing. |
| SMT-TB188-27Marc | 2018-05-21. Service bulletin. Technical Bulletin 188 provides instructions that apply to Triumph Diagnostic Tool Compatibility with Windows Operating Systems, Fog Lights Warning, TFT Instruments - Calibration Update, Exhaust Header Nuts Tightening Sequence, Hugger Fixing, Pinpoint Test - Brake Switches, Alternator Cover Parts Kit, Starter Motor Parts Kit. |
| SMT-TN 159 1 Oct | 2017-11-03. Service bulletin. Technical service bulletin 159 addressing 19 service instructions, some of which apply to all models. Instructions relate to piston and piston top ring, alternator rotor retaining bolt, rear brake hose guide, auxiliary lights, headlight spares, gear selector drum and neutral light switch, pulser ring fixings, side stand fixing, battery terminal cover, heated grip fixings, headstock bearing adjustment, front and rear diretion indicator fixings, swinging arm, throttle linkage cleaning, headlight label, clutch lifter piece, rear brake caliper bleed nipple and owner's handbook. |
| SMT-TN 155 1 Feb | 2017-11-03. Service bulletin. Technical service bulletin 155 addressing 9 service instructions, some of which apply to all models. Instructions relate to the upper drive belt guard, catalytic converter mounting bracket, torque figures updates, horn fixing, centre stand fixings, front brake hose clip, clutch cover kits, breather cover fixings and audio systems. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.