Transport Canada recall 2011316
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2011316 |
| Manufacturer's number | SB430 |
| Reported | 2011-08-23 |
| Component | Accessories |
| Notification type | Recalls Audit |
| Units potentially affected | 74 |
What is wrong
On certain Triumph Tiger 800 and Tiger 800 XC motorcycles equipped with an accessory center stand, the stand return spring may fracture and fail. This could allow the center stand to contact the road surface while the vehicle is underway, which could distract the rider and result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the center stand spring.
| 2011 TRIUMPH TIGER 800 | |
|---|---|
| 2012 TRIUMPH TIGER 800 |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SMT-COM01 | 2023-12-11. Service bulletin. Dealer notice announcing the availability of Diagnostic software 2023-06 and dealers should begin using it immediately. |
|---|---|
| 22714 | 2023-01-03. Service bulletin. Dealer notice announcing the availability of Diagnostic software 2022-11 and dealers should begin using it immediately. |
| 22651 | 2023-01-03. Service bulletin. Dealer notice announcing the availability of Diagnostic software 2022-10 and dealers should begin using it immediately. |
| 20680 SVC | 2022-05-31. Service bulletin. Triumph has released Technical Bulletin 222 including 8 subjects across a range of models. |
| SMT-TN-142 | 2021-05-10. Service bulletin. The drive chain vertical movement setting has changed to 20 - 30 mm for the above model. This change affects all bikes from the start of production. The Tiger 800XC setting has not changed and remains as described in the service manual and owner handbook. For the procedure to check and adjust the drive chain vertical movement setting refer to the service manual or owner handbook. |
| SMT-COM06-17MAR2 | 2020-04-13. Service bulletin. Dealer notice announcing the availability of Diagnostic software 2020-4.2 available and dealers should begin using it immediately. |
| SMT-COM02-18FEB2 | 2020-03-16. Service bulletin. Dealer notice announcing the auto-issue of three new service tools. |
| SMT-TB201-20DEC2 | 2020-01-21. Service bulletin. Technical Bulletin 200 provides instructions that apply to Steering Lock and Keys, Neutral Position Adaption, Triumph Diagnostic Tool - End of Support for Microsoft Windows 7®, Triumph Diagnostic Tool - Internet Connection and Minimum eEquipment Requirement, Torque Change, Clutch Cable, Camshaft Frame Installation, Immobiliser Antenna Wire Routing. |
| SMTCom0111 | 2019-03-18. Service bulletin. Dealer notice announcing the availability of Technical Bulletin 193. |
| SMTTB19311 | 2019-03-18. Service bulletin. Technical Bulletin 193 provides instructions that applies to California Proposition 65 Hang Tag Reminder (Californian Market Only), Front Subframe Cable Clips, Alternator Cover Sealant, Chassis ECM DTCs Flagged Incorrectly, Pin Point Test - Power Source Voltage Drop/Voltage Rise, Inner Tube Valve Nut, Swinging Arm/Chain Rubbing Strip - Parts Kit, Service Manual Correction - Rear Brake Disc Minimum Thickness, Service Manual Correction - Main Bearing Selection, Owners Handbook Correction - Scheduled Maintenance Chart, Motorcycle Assembly Guide - Windscreen Installation. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.