Transport Canada recall 2011224
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2011224 |
| Manufacturer's number | L23 |
| Reported | 2011-06-10 |
| Component | Steering |
| Notification type | Safety Mfr |
| Units potentially affected | 2270 |
What is wrong
Certain vehicles may have been built with a missing or incorrectly installed steering column pivot rivet. A steering column with a miss-installed rivet may not perform as intended in the event of a crash, which may increase the risk of personal injury. Correction: Dealers will inspect for steering column rivet presence and alignment, and repair as required.
| 2011 CHRYSLER 200 | |
|---|---|
| 2011 CHRYSLER TOWN & COUNTRY | |
| 2011 DODGE AVENGER | |
| 2011 DODGE CALIBER | |
| 2011 DODGE GRAND CARAVAN | |
| 2011 DODGE JOURNEY | |
| 2011 DODGE NITRO | |
| 2011 JEEP COMPASS | |
| 2011 JEEP LIBERTY | |
| 2011 JEEP PATRIOT | |
| 2011 JEEP WRANGLER |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 2300717 | 2022-10-17. Service bulletin. This bulletin involves inspecting the front and rear crossmembers for perforation/rust through and if necessary, replacing the crossmember(s). Customers may describe a vibration at the steering wheel or may have been informed by a technician or state vehicle inspection that the front and/or rear crossmember is severely corroded. |
|---|---|
| 3100121 | 2022-09-26. Service bulletin. Steering System Inspection After a Collision This bulletin documents the FCA US LLC position regarding conditions under which replacement or repair of steering system components are required. |
| 08-005-17 REV. A | 2022-08-08. Service bulletin. Clockspring Replacement (X68 Warranty Extension) This bulletin involves diagnosing the clockspring/Steering Angle Sensor (SAS).If the diagnostic tests indicate the clockspring/SAS requires replacement, replace the clockspring, upper and lower steering column shrouds and steering wheel back cover. Some customers may experience the illumination of the airbag warning lamp or traction control indicator lamp. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: B1B00 - Driver Airbag Squib 1 Circuit Low. B1B01 - Driver Airbag Squib 1 Circuit High. B1B02 - Driver Airbag Squib 1 Circuit Open. B1B03 - Driver Airbag Squib 1 Circuit Shorted Together. B1B04 - Driver Airbag Squib 2 Circuit Low. B1B05 - Driver Airbag Squib 2 Circuit High. B1B06 - Driver Airbag Squib 2 Circuit Open. B1B07 - Driver Airbag Squib 2 Circuit Shorted Together. C123F - Steering Angle Sensor Comparative Performance. C1219 - Steering Angle Sensor Erratic Performance. C2205 - Steering Angle Sensor Internal. P0579 - Speed Control Multiplexed Switch #1 Performance. P0581 - Speed Control Multiplexed Switch #1 High. P0591 - Speed Control Multiplexed Switch #2 Performance. P0593 - Speed Control Multiplexed Switch #2 High. U1109 - Lost Communication With Lin Steering Wheel Controls. |
| 23-007-17 REV. B | 2022-08-08. Service bulletin. Front And Rear Crossmember Corrosion (X69 Warranty Extension) This bulletin involves inspecting the front and rear crossmembers for perforation/rust through and if necessary, replacing the crossmember(s). Customers may describe a vibration at the steering wheel or may have been informed by a technician or state vehicle inspection that the front and/or rear crossmember is severely corroded.If the customer describes the symptom/condition listed above, perform the Diagnostic Procedure. |
| M31050813 | 2021-03-15. Service bulletin. New Safety Recall Advanced Communication ? M31050813 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2008 through 2012 model year (JK) Jeep Wrangler vehicles equipped with a Right Hand Drive (RHD) steering configuration (sales code AHF) and built for U.S specifications (sales code YAA). Some of the above vehicles may have an airbag system clockspring assembly that could experience a compromised airbag circuit. This condition could result in an airbag warning lamp illumination. Chrysler will conduct a voluntary safety recall on all affected RHD vehicles to replace the airbag system clockspring. Additionally, 2008 through 2010 model year vehicles will receive a steering wheel dust shield. NOTE: Safety Recall L37 which provided an interim repair for this issue is being cancelled. Involved vehicle owners will be sent a second owner notification requesting they have their vehicle repaired. Dealers will be notified of the launch of this safety recall by way of established methods used in the past. We ask that you please take the time to ensure that your personnel are aware of this communication and are prepared to execute a customer friendly process for inquiries on involved vehicles. |
| DOT-L4X8T-04 | 2019-04-30. Service bulletin. The SKU is a Tie Rod Center Stud. The Customer commnunication requested return of unsold inventory to inpsect for possible incorrect direction threads (right hand rather than left hand). Incorrect direction threads will prevent it from being installed. |
| 23-007-17 REV. B | 2018-06-11. Service bulletin. Front And Rear Crossmember Corrosion (X69 Warranty Extension) This bulletin involves inspecting the front and rear crossmembers for perforation/rust through and if necessary, replacing the crossmember(s). Customers may describe a vibration at the steering wheel or may have been informed by a technician or state vehicle inspection that the front and/or rear crossmember is severely corroded.If the customer describes the symptom/condition listed above, perform the Diagnostic Procedure. |
| 08-010-14 | 2018-05-21. Service bulletin. Cruise Control Slow Or No Response This bulletin involves upgrading the software on the Steering Column Control Module (SCCM). A customer may experience, no response or slow response to cruise control switch activations. Issues will be experienced by the customers that activate/press the switches in a very fast manner. |
| M31050813 | 2018-05-21. Service bulletin. New Safety Recall Advanced Communication ? M31050813 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2008 through 2012 model year (JK) Jeep Wrangler vehicles equipped with a Right Hand Drive (RHD) steering configuration (sales code AHF) and built for U.S specifications (sales code YAA). Some of the above vehicles may have an airbag system clockspring assembly that could experience a compromised airbag circuit. This condition could result in an airbag warning lamp illumination. Chrysler will conduct a voluntary safety recall on all affected RHD vehicles to replace the airbag system clockspring. Additionally, 2008 through 2010 model year vehicles will receive a steering wheel dust shield. NOTE: Safety Recall L37 which provided an interim repair for this issue is being cancelled. Involved vehicle owners will be sent a second owner notification requesting they have their vehicle repaired. Dealers will be notified of the launch of this safety recall by way of established methods used in the past. We ask that you please take the time to ensure that your personnel are aware of this communication and are prepared to execute a customer friendly process for inquiries on involved vehicles. |
| 19-001-12 | 2012-04-13. Service bulletin. CHRYSLER: MAY BE A WHINE NOISE COMING FROM THE POWER STEERING DURING ALL DRIVING CONDITIONS. WHEN STEERING LEFT OR RIGHT OR CHANGING THE ENGINE RPM MAY EFFECT THE NOISE. *KB |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.