Transport Canada recall 2005299
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2005299 |
| Manufacturer's number | E14 |
| Reported | 2005-10-07 |
| Component | Powertrain |
| Notification type | Safety Mfr |
| Units potentially affected | 19747 |
What is wrong
On certain vehicles, the cup plug which retains the park pawl anchor shaft in the 42RLE automatic transmission could be missing or not properly staked in its bore, potentially allowing the shaft to move out of position and preventing the transmission from being placed in the PARK position. If this occurs and the parking brake is not applied, the vehicle may roll away and cause an accident without warning. Correction: Dealers will install a bracket to ensure that the park pawl anchor shaft is retained in the proper position.
| 2005 CHRYSLER 300 | |
|---|---|
| 2005 DODGE DAKOTA | |
| 2005 DODGE DURANGO | |
| 2005 DODGE MAGNUM | |
| 2005 JEEP LIBERTY | |
| 2005 JEEP TJ |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 101232 | 2024-11-07. Service bulletin. Plate - Planetary |
|---|---|
| 9004009 | 2022-09-26. Service bulletin. Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. |
| S2121000003 | 2022-09-26. Service bulletin. Transfer Case Gear Motor/Actuator Installation Guidelines. |
| 9004361 | 2022-09-26. Service bulletin. NAG1 Transmission Before installing the transmission with the engine, check for dowel pins (2) for alignment. If the pins are missing request to add the dowel pin first and then install the transmission |
| 9004009 | 2022-09-26. Service bulletin. Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. |
| 9004350 | 2022-09-26. Service bulletin. GEAR MOTOR, Transfer Case The gear motor assembly is shipped in AWD/2WD position. The transfer case needs to be positioned in AWD/2WD position to properly assemble gear motor to T-Case. Please reference Star Online publication S2121000003 for further details. Do not have the transfer case in in another position other than AWD/2WD and rotate the motor to align the bolt holes as this could result in damage to the gear motor. |
| 9001784 | 2022-09-26. Service bulletin. Mechanical rocker arm, intake, 1.7 ratio. |
| 14-002-14 | 2022-08-29. Service bulletin. Engine Stall Immediately Following Fuel Tank Fill-Up (X53 Lifetime Warranty Extension) This bulletin involves replacing the fuel tank with a revised part. Some customers may experience an engine stall condition just after filling the fuel tank. The integral mulit-functional control valve may allow liquid fuel to enter the evaporative emissions system causing a rich fuel condition when the purge system is initiated.. |
| 14-002-14 | 2022-08-22. Service bulletin. Engine Stall Immediately Following Fuel Tank Fill-Up (X53 Lifetime Warranty Extension) This bulletin involves replacing the fuel tank with a revised part. Some customers may experience an engine stall condition just after filling the fuel tank. The integral mulit-functional control valve may allow liquid fuel to enter the evaporative emissions system causing a rich fuel condition when the purge system is initiated.. |
| 18-042-14 | 2022-08-15. Service bulletin. Generic Powertrain Control Module (PCM) Procedure This bulletin involves programming a generic PCM with software. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.