Transport Canada recall 2005021
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2005021 |
| Manufacturer's number | 05011 |
| Reported | 2005-11-26 |
| Component | Electrical |
| Notification type | Safety Mfr |
| Units potentially affected | 23507 |
What is wrong
On certain vehicles, the stop lamp switch may become misadjusted if an upward force is applied to the brake pedal. The stop lamp electrical contacts in a misadjusted stop lamp switch may not open when the brake pedal is at its natural rest position, resulting in the brake lights staying illuminated continuously without service brake pedal application. Correction: Dealers will replace the stop lamp switch.
| 2004 CHEVROLET EPICA | |
|---|---|
| 2004 CHEVROLET OPTRA |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| General Communication | 2024-08-26. Service campaign. Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers. |
|---|---|
| 24-NA-098 | 2024-06-25. Service bulletin. This service bulletin provides information for dealers/technicians on Service Programming System (SPS) Error Codes E4398, E4399, E4401, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491, E4492, or E6961 and resolution information. |
| 10-08-45-001H | 2024-04-05. Service bulletin. This bulletin provides information for electrical ground repairs using new General Motors replacement fasteners with conductive finish. |
| 07-08-49-020R | 2023-10-18. Service bulletin. This informational bulletin provides information for the IPC odometer programming method quick reference guide. |
| 22-NA-205 | 2022-11-02. Service bulletin. This service bulletin provides information on Module Harvesting. |
| 21NA124 | 2021-07-06. Service bulletin. This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set. |
| 15-NA-079 | 2021-04-20. Service bulletin. OnStar® Voice Fallback Number Update Some customers may have received a letter from OnStar® stating that "We recently tried to provide a software update to the OnStar® hardware in your vehicle. However, your system could not be updated remotely. As a result, some of your OnStar® system functions may not be working as expected." The customer is further instructed in this letter to "Please contact your dealer – or any dealer near you – as soon as possible to schedule an appointment for this no-cost software update. Your dealer will reprogram your OnStar® module with an update. This is for vehicles that have previously received the Canada upgrade as described in Service Bulletin #15-08-44-001F." |
| 07-08-49-020J | 2021-04-20. Service bulletin. IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system (SPS). 2. Odometer setup at the electronic service center (ESC) when using an exchange IPC/DIC. 3. Tech 2® – The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. *The odometer programming is integrated as part of the BCM programming procedure. It is not a stand-alone event. |
| 070849020M | 2021-04-16. Service bulletin. IPC Odometer Programming Method Quick Reference Guide |
| 070849020Q | 2020-06-22. Service bulletin. This informational bulletin provides information for the IPC odometer programming method quick reference guide. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.