Transport Canada recall 2004088
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2004088 |
| Reported | 2004-03-09 |
| Component | Brakes |
| Notification type | Compliance Mfr |
| Units potentially affected | 52776 |
What is wrong
On certain vehicles, the brake hoses are not labelled with a designation that identifies the manufacturer of the assembly as required by CMVSS 106. This non-compliance has no effect on the performance of the involved brake hose assemblies. Correction: Since this does not pose a safety risk, no corrective action is required.
| 2004 BUICK RAINIER | |
|---|---|
| 2003 CHEVROLET SSR | |
| 2004 CHEVROLET SSR | |
| 2002 CHEVROLET TRAILBLAZER | |
| 2003 CHEVROLET TRAILBLAZER | |
| 2004 CHEVROLET TRAILBLAZER | |
| 2002 CHEVROLET TRAILBLAZER EXT | Listed as a series or trim of this model. |
| 2003 CHEVROLET TRAILBLAZER EXT | Listed as a series or trim of this model. |
| 2004 CHEVROLET TRAILBLAZER EXT | Listed as a series or trim of this model. |
| 2002 GMC ENVOY | |
| 2003 GMC ENVOY | |
| 2004 GMC ENVOY | |
| 2002 GMC ENVOY XL | Listed as a series or trim of this model. |
| 2003 GMC ENVOY XL | Listed as a series or trim of this model. |
| 2004 GMC ENVOY XL | Listed as a series or trim of this model. |
| 2004 GMC ENVOY XUV | Listed as a series or trim of this model. |
| 2002 OLDSMOBILE BRAVADA | |
| 2003 OLDSMOBILE BRAVADA | |
| 2004 OLDSMOBILE BRAVADA |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| PIP4723F | 2022-02-14. Service bulletin. This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update. |
|---|---|
| PIT3271J | 2019-12-09. Service bulletin. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection. |
| 01-00-89-010J | 2018-05-21. Service bulletin. This informational bulletin provides a revision for 01-00-89-010I to add the 2013 model year. |
| PIT4907A | 2017-08-15. Service bulletin. This Preliminary Information communication provides information to the technician about brake rotors on new vehicles and replacement parts from General Motors Service Parts Operations. Technician should be advised the costing should not be removed from the brake rotor it will wear off with normal brake usage. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle. |
| PIT4943C | 2017-08-15. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442 has been verified do not disturb any of the fuel system components. The technician now can use the scan tool to close the Evaporative Emissions System. If possible change the tank pressure sensor units from inch_H2O to milimeter_Hg for better resolution. Now the vehicle can be stared to monitor the tank pressure sensor output value for approximately two minutes. If the tank pressure sensor value does change, pressurize the fuel tank side of the purge solenoid with the GE 41413-A / J 41413-A and the necessary adaptors. Now add smoke and allow pressure to stabilize for 2 minutes. If smoke is allowed to pass through the purge solenoid, replace the purge solenoid. If the tank pressure sensor value does not change, then install CH-48096 adaptor between the purge line from the canister and the purge solenoid. With the Evaporative Emissions System closed, pressurize the system through the CH-48096 adaptor and allow the system to completely stabilize, by observing the Press / Vac Gauge for a minimum of 5 minutes. Now add smoke to the system with GE 41413-A / J 41413-A after system stabilization. Now inspect the purge solenoid, engine side, fuel cap, canister vent solenoid filter and any line quick connects. When the leak is unable to be located, test under a vacuum condition. his type of leak may be detected by using the scan tool Purge/Seal function to create a vacuum in the Evaporative Emissions System and then observe the FTP sensor parameter for vacuum decay. |
| 040525002 | 2007-08-15. Service bulletin. ABS LIGHT ON, DTC'S C0265, C0201, U1041 SET AND/OR LOSS OF COMMUNICATION WITH BRAKE MODULE. (REGROUND EBCM GROUND). *KB |
| 3832 | 2006-02-22. Service bulletin. ABS, RED BRAKE ,SVC AND 4WD LIGHT ON HVAC BLOWER INOPERATIVE. *AK UPDATED 1/30/08. *NJ |
| 1750177 | 2006-02-17. Service bulletin. ABS BRAKE SVC AND 4WD LIGHT ON HVAC BLOWER INOPERATIVE. *AK |
| 3779 | 2006-01-09. Service bulletin. SQUEAK NOISE ON BRAKE APPLY. *TT |
| 040526003 | 2005-11-08. Service bulletin. PARK BRAKE MAY NOT RELEASE AFTER ENGAGEMENT. *TT |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.