NHTSA recall 99V362000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 99V362000 |
| Manufacturer's number | 718 |
| Manufacturer | SAAB CARS USA, INC. |
| Reported | 1999-12-29 |
| Owners notified | 2000-01-30 |
| Component | EQUIPMENT:OTHER:LABELS |
| Units potentially affected | 424 |
What is wrong
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE BRAKE RESERVOIR LABEL WAS OMITTED. THIS DOES NOT COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 135, "PASSENGER CAR BRAKE SYSTEMS."
What can happen
WITHOUT THIS LABEL, SOMEONE MAY USE THE INCORRECT SPECIFICATION BRAKE FLUID, GET DIRT INTO THE RESERVOIR, OR ALLOW MOISTURE INTO THE BRAKE FLUID, RESULTING IN LESS EFFECTIVE BRAKING AND POSSIBLY A CRASH.
The remedy
OWNERS WILL BE MAILED LABELS AND INSTALLATION INSTRUCTIONS.
Notes
SAAB RECALL NO. 718.OWNER NOTIFICATION BEGAN JANUARY 30, 2000.OWNERS WHO DO NOT RECEIVE THE FREE LABEL AND INSTALLATION INSTRUCTIONS WITHIN A REASONABLE TIME SHOULD CONTACT SAAB AT 1-800-955-9007.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
| 1999 SAAB 9-3 | Built 1998-12-15 to 1999-07-16. |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| Recalls | 2024-01-08. Service bulletin. Vehicle Recalls |
|---|---|
| 17-NA-073 | 2023-03-03. Service bulletin. This warranty administration bulletin provides information regarding the field action courtesy transportation policy. |
| PI0281D | 2021-04-26. Service bulletin. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy. |
| PI0281D | 2021-04-26. Service bulletin. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy. |
| 99-08-51-007F | 2021-04-26. Service bulletin. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin. |
| 99-08-51-007F | 2021-04-26. Service bulletin. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin. |
| 16NA260 | 2016-10-17. Service bulletin. THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPROGRAM THE MEDIA DISC PLAYER WITH THE LATEST CALIBRATIONS TO CORRECT A CONDITION OF THE REAR ENTERTAINMENT SYSTEM NOT OPERATING AS INTENDED IN COLDER AMBIENT TEMPERATURE AREAS DUE TO CALIBRATION CONCERNS. |
| 3672065 | 1999-11-23. Service bulletin. CUSTOMERS MAY ADDRESS CONCERNS ABOUT INTERFERENCE OR POOR RADIO RECEPTION WHEN LISTENING TO AM STATIONS. *TT |
| 371 | 1999-01-27. Service bulletin. EXPERIENCING NO SOUND FROM ACCESSORY CD CHANGER AFTER INSTALLATION. *YC |
| 367 | 1999-01-27. Service bulletin. ADDRESSING QUESTIONS REGARDING RADIO FREQUENCIES. *YC |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.