Service bulletin 367
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 603053 |
| Published by NHTSA | 1999-01-27 |
| Manufacturer's number | 367 |
| Manufacturer's date | 1998-11-19 |
| NHTSA component | EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC. |
NHTSA's summary
ADDRESSING QUESTIONS REGARDING RADIO FREQUENCIES. *YC
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Equipment and accessories
| SAAB 9-3 | 1999 |
|---|---|
| SAAB 9-5 | 1999 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 99V362000 | 1999-12-29. EQUIPMENT:OTHER:LABELS |
|---|---|
| 98V139000 | 1998-06-23. EQUIPMENT:OTHER:LABELS |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| Recalls | 2024-01-08. Service bulletin. Vehicle Recalls |
|---|---|
| 17-NA-073 | 2023-03-03. Service bulletin. This warranty administration bulletin provides information regarding the field action courtesy transportation policy. |
| PI0281D | 2021-04-26. Service bulletin. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy. |
| PI0281D | 2021-04-26. Service bulletin. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy. |
| 99-08-51-007F | 2021-04-26. Service bulletin. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin. |
| 99-08-51-007F | 2021-04-26. Service bulletin. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin. |
| 16NA260 | 2016-10-17. Service bulletin. THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPROGRAM THE MEDIA DISC PLAYER WITH THE LATEST CALIBRATIONS TO CORRECT A CONDITION OF THE REAR ENTERTAINMENT SYSTEM NOT OPERATING AS INTENDED IN COLDER AMBIENT TEMPERATURE AREAS DUE TO CALIBRATION CONCERNS. |
| 3672249 | 2000-12-15. Service bulletin. CUSTOMER SATISFACTION CAMPAIGN 838: DISTURBANCES DUE TO WIRING HARNESS PROVISIONS FOR CD CHANGER . CARS AFFECTED ARE WITHIN VIN RANGES X3020001 - Y3046149. *TT |
| 3672065 | 1999-11-23. Service bulletin. CUSTOMERS MAY ADDRESS CONCERNS ABOUT INTERFERENCE OR POOR RADIO RECEPTION WHEN LISTENING TO AM STATIONS. *TT |
| 371 | 1999-01-27. Service bulletin. EXPERIENCING NO SOUND FROM ACCESSORY CD CHANGER AFTER INSTALLATION. *YC |