NHTSA recall 26V402000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 26V402000 |
| Manufacturer's number | 26S48 |
| Manufacturer | Ford Motor Company |
| Reported | 2026-06-24 |
| Component | POWER TRAIN:AUTOMATIC TRANSMISSION |
| Units potentially affected | 741195 |
| Part numbers | JL7A-14C204-*, LB5A-14C204-*, ML3A-14C204-* |
What is wrong
Ford Motor Company (Ford) is recalling certain 2018-2021 Navigator, Expedition, 2020-2021 Explorer, Lincoln Aviator, and 2021 F-150 vehicles. The transmission park pawl may engage while the vehicle is in motion, resulting in park system damage.
What can happen
Park system damage may result in a vehicle rollaway, increasing the risk of a crash.
The remedy
Dealers will update the powertrain control module software, and inspect and replace any damaged transmission components as necessary, free of charge. Interim letters, notifying owners of the safety risk, were mailed July 10, 2026. Additional letters will be sent once the remedy is available, anticipated in April 2027. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S48. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on June 26, 2026.
| 2018 FORD EXPEDITION | Built from 2017-03-14. |
|---|---|
| 2019 FORD EXPEDITION | |
| 2020 FORD EXPEDITION | |
| 2021 FORD EXPEDITION | Built to 2021-07-27. |
| 2020 FORD EXPLORER | Built from 2018-10-28. |
| 2021 FORD EXPLORER | Built to 2021-11-09. |
| 2021 FORD F-150 | Built 2020-01-08 to 2021-10-08. |
| 2020 LINCOLN AVIATOR | Built from 2018-10-25. |
| 2021 LINCOLN AVIATOR | Built to 2021-08-25. |
| 2018 LINCOLN NAVIGATOR | Built from 2017-03-16. |
| 2019 LINCOLN NAVIGATOR | |
| 2020 LINCOLN NAVIGATOR | |
| 2021 LINCOLN NAVIGATOR | Built to 2021-05-24. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| TSB 24-2097 | 2024-04-04. Service bulletin. Some 2021-2022 F-150 non-Lightning vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator and Service Vehicle Soon message in the instrument panel cluster (IPC) with diagnostic trouble code (DTC) U031D in the powertrain control module (PCM) and no other drivability concerns. This may be due to the configuration of the PCM. |
|---|---|
| SSM 52371 | 2024-04-04. Service bulletin. Some 2021-2022 F-150 non-Lightning vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator and Service Vehicle Soon message in the instrument panel cluster (IPC) with diagnostic trouble code (DTC) U031D in the powertrain control module (PCM) and no other drivability concerns. This may be due to the configuration of the PCM. To correct this condition, run the PCM - Disable Pro Trailer Hitch Assist application using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. |
| SSM 52349 | 2024-04-04. Service bulletin. Some 2021-2023 F-150 vehicles may exhibit DTC C0604:00 stored in the powertrain control module (PCM) and may have an Active Air Dam System Fault See Manual message displayed in the instrument panel cluster (IPC). To correct this condition, clear and retest for the DTC C0604:00. If DTC C0604:00 returns, refer to Workshop Manual (WSM) Section 501-19 Bumpers, Diagnosis and Testing for additional diagnosis. |
| SSM 52244 | 2024-02-14. Service bulletin. Some 2021-2023 F-150 vehicles equipped with a 3.5L PowerBoost hybrid engine, 2020-2023 Explorer vehicles equipped with a 3.3L hybrid engine and 2020-2023 Aviator vehicles equipped with a 3.0L hybrid engine may exhibit a malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0A1E stored in the powertrain control module (PCM) and auto start/stop disabled. This may be due to a loose wiring connection to the belt integrated starter generator (BISG). The Workshop Manual (WSM) has recently been updated to provide new direction for DTC P0A1E. Refer to the WSM, Section 303-06 Starting System, Diagnosis and Testing, Starting System for applicable diagnosis. |
| OTA23PU0630YAW | 2024-02-07. Service bulletin. Software Update 23-PU0630-YAW-RT for 2021 MY F-150 vehicles is now available. Quality Improvements include: -Correct the Generator voltage desired (GENVDSD) parameter identification (PID) missing from the powertrain control module (PCM) PID list in the Ford Diagnosis And Repair System (FDRS) scan tool. Refer TSB 23-2154 - Robustness action in operation of vehicle to detect low-state-of-charge battery and prevent potential engine stall, as well as provide improved warning to customers when low-state-of-charge conditions exist. - Robustness action to prevent potential line pressure drift DTC P084B from setting. - Eliminate potential ABS Yaw Rate Calibration issue. - Robustness action to alleviate the Nuisance SSN (Stop Safely Now) mesage from setting and vehicle should operate as expected in the next Key Start event - Eliminates potential Emergency Parking Brake activation when wire harness experience a short. |
| TSB 23-2429 | 2024-01-05. Service bulletin. This article supersedes TSB 23-2363 to add 2021-2022 vehicle model years, update the symptom and the causal part. Some 2021-2023 F-150 vehicles equipped with a 3.5L PowerBoost engine may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P084B stored in the powertrain control module (PCM). This may be due to the software level of the PCM. To correct this condition, perform the Service Procedure below to reprogram the PCM to the latest software level via the Ford Diagnosis and Repair System (FDRS). |
| TSB 23-2350 | 2023-11-22. Service bulletin. Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang, 2019-2023 Ranger vehicles equipped with a 10R80 transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve. To correct the condition, follow the Service Procedure to identify and correct the condition. |
| TSB 23-2256 | 2023-09-01. Service bulletin. Some 2020-2021 Expedition vehicles my exhibit a no restart during auto start-stop operation. This may be due to a software parameter in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM. |
| SSM 51764 | 2023-07-03. Service bulletin. Some 2020-2023 Explorer/Aviator vehicles equipped with a 3.0L EcoBoost may exhibit an illuminated malfunction indicator lamp (MIL) and low oil pressure warning in the instrument panel cluster (IPC), with diagnostic trouble codes (DTC) P0521 and/or P0524 in the powertrain control module (PCM). This condition may be caused by an internal oil pressure leak. If pinpoint test E in the Workshop Manual (WSM) Section 303-01B directs you to the replacement of the oil pump, upon reassembly inspect that the main oil gallery tube (6718) is assembled and aligned properly on the back of the engine front cover. The engine oil gallery seal (00815) must be replaced any time the front cover is removed (per WSM Section 303-01B). The WSM front cover removal and installation procedure is in the process of being updated. |
| TSB 23-2176 | 2023-06-13. Service bulletin. Some 2020-2022 Explorer vehicles equipped with 2.3L engine and 10R60 automatic transmission may exhibit a delayed reverse engagement. This may be due to the software in the powertrain control module (PCM). To correct the condition, follow the Service Procedure to reprogram the PCM. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.