NHTSA recall 25V863000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 25V863000 |
| Manufacturer's number | 25C69 |
| Manufacturer | Ford Motor Company |
| Reported | 2025-12-12 |
| Owners notified | 2026-02-03 |
| Component | POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:PARK PAWL |
| Units potentially affected | 272645 |
| Part numbers | PZ18-7P236-*, NL38-7P236-* |
| Report | Quarterly report 2, for 2026 quarter 2 |
|---|---|
| Filed with NHTSA | 2026-07-22 |
| Vehicles in the campaign | 272645 |
| Reported remedied | 204251 (74%) |
| Reported unreachable | 2118 |
| Reported removed | 2 |
These are the manufacturer's totals for the whole campaign at the end of 2026 quarter 2, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Ford Motor Company (Ford) is recalling certain 2022-2026 F-150 Lightning BEV, 2024-2026 Mustang Mach-E, and 2025-2026 Maverick vehicles. The integrated park module may fail to lock into the park position when the driver shifts into park. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 114, "Theft Protection and Rollaway Prevention."
What can happen
A loss of park function can allow the vehicle to rollaway, increasing the risk of a crash.
The remedy
The park module software will be updated over-the-air (OTA) or by a dealer, free of charge. Owner notification letters were mailed February 3, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C69. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 26, 2026.
| 2022 FORD F-150 LIGHTNING BEV | Built from 2021-10-14. Listed as a series or trim of this model. |
|---|---|
| 2023 FORD F-150 LIGHTNING BEV | Listed as a series or trim of this model. |
| 2024 FORD F-150 LIGHTNING BEV | Listed as a series or trim of this model. |
| 2025 FORD F-150 LIGHTNING BEV | Listed as a series or trim of this model. |
| 2026 FORD F-150 LIGHTNING BEV | Built to 2025-10-07. Listed as a series or trim of this model. |
| 2025 FORD MAVERICK | Built from 2024-04-11. |
| 2026 FORD MAVERICK | Built to 2025-11-17. |
| 2024 FORD MUSTANG MACH E | Built to 2025-11-24. |
| 2025 FORD MUSTANG MACH E | Built to 2025-11-24. |
| 2026 FORD MUSTANG MACH E | Built to 2025-11-24. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| TSB 24-2097 | 2024-04-04. Service bulletin. Some 2021-2022 F-150 non-Lightning vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator and Service Vehicle Soon message in the instrument panel cluster (IPC) with diagnostic trouble code (DTC) U031D in the powertrain control module (PCM) and no other drivability concerns. This may be due to the configuration of the PCM. |
|---|---|
| SSM 52371 | 2024-04-04. Service bulletin. Some 2021-2022 F-150 non-Lightning vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator and Service Vehicle Soon message in the instrument panel cluster (IPC) with diagnostic trouble code (DTC) U031D in the powertrain control module (PCM) and no other drivability concerns. This may be due to the configuration of the PCM. To correct this condition, run the PCM - Disable Pro Trailer Hitch Assist application using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. |
| SSM 52349 | 2024-04-04. Service bulletin. Some 2021-2023 F-150 vehicles may exhibit DTC C0604:00 stored in the powertrain control module (PCM) and may have an Active Air Dam System Fault See Manual message displayed in the instrument panel cluster (IPC). To correct this condition, clear and retest for the DTC C0604:00. If DTC C0604:00 returns, refer to Workshop Manual (WSM) Section 501-19 Bumpers, Diagnosis and Testing for additional diagnosis. |
| TSB 24-2068 | 2024-04-03. Service bulletin. Some 2023 F-150 vehicles equipped with 3.5L PowerBoost engine and F-150 Lightning vehicles receiving a replacement Anti-Lock Brake System (ABS) module may experience an error during the FDRS Programmable Module Installation (PMI) routine which states Procedure Unsuccesful - GetFlashActionPartNumbers Unable To Obtain Flash Action Part Numbers From Available Topology. This may be due to the software level of the powertrain control module (PCM) and/or the secondary on-board diagnostic module C (SOBDMC). |
| SSM 52318 | 2024-03-20. Service bulletin. Some 2024 F-150 vehicles equipped with a 3.5L PowerBoost may set incorrect cylinder misfire DTCs while the CSER monitor is active. The CSER monitor runs for approximately 3 minutes after a cold soak start-up. If a misfire occurs while the CSER monitor is running, the powertrain control module (PCM) software strategy may set an incorrect cylinder misfire code. Prior to a repair attempt, allow the vehicle to run for at least 3 minutes and verify any individual cylinder misfire codes by performing a Power Balance Test using the Ford Diagnostic and Repair System (FDRS) scan tool. Engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in Q3 2024. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in Q3 2024. Monitor OASIS for additional information. |
| SSM 52309 | 2024-03-20. Service bulletin. Some 2024 F-150 vehicles may set diagnostic trouble code (DTC) P0534:00 in the powertrain control module (PCM) when a diagnostic self-test is performed. This may be due to the PCM responding to large changes in ambient temperatures from warm to below freezing when the vehicle has less than 62 miles (100 km) and still in a rapid learn mode for the ambient air temperature logic. The rapid update to the temperature can result in the vehicle setting this DTC. DTC P0534:00 does not affect vehicle drivability and has no effect on vehicle operation. No additional diagnostics or service is required for this condition at this time. DTC P0534:00 is a background diagnostic code for service only and does not illuminate the malfunction indicator lamp (MIL), powertrain malfunction indicator (wrench), or provide any indication to the vehicle operator. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in Q2 2024. Replacement or reprogramming of the PCM will not resolve this condition. Monitor OASIS for additional informati |
| SSM 52244 | 2024-02-14. Service bulletin. Some 2021-2023 F-150 vehicles equipped with a 3.5L PowerBoost hybrid engine, 2020-2023 Explorer vehicles equipped with a 3.3L hybrid engine and 2020-2023 Aviator vehicles equipped with a 3.0L hybrid engine may exhibit a malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0A1E stored in the powertrain control module (PCM) and auto start/stop disabled. This may be due to a loose wiring connection to the belt integrated starter generator (BISG). The Workshop Manual (WSM) has recently been updated to provide new direction for DTC P0A1E. Refer to the WSM, Section 303-06 Starting System, Diagnosis and Testing, Starting System for applicable diagnosis. |
| SANVol 2 Issue 1 | 2024-02-06. Service bulletin. The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This artile includes ifnormation on warranty, technical service tips and other service information. |
| TSB 23-2429 | 2024-01-05. Service bulletin. This article supersedes TSB 23-2363 to add 2021-2022 vehicle model years, update the symptom and the causal part. Some 2021-2023 F-150 vehicles equipped with a 3.5L PowerBoost engine may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P084B stored in the powertrain control module (PCM). This may be due to the software level of the PCM. To correct this condition, perform the Service Procedure below to reprogram the PCM to the latest software level via the Ford Diagnosis and Repair System (FDRS). |
| TSB 23-2425 | 2024-01-05. Service bulletin. This article supersedes TSB 23-2337 to update the Service Procedure and the causal part. Some 2022-2023 F-150 hybrid vehicles equipped with a 3.5L PowerBoost engine may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0420 and/or P0430 stored in the powertrain control module (PCM). This may be due to high sulfur content in the fuel. To correct the condition, follow the Service Procedure to reprogram the PCM and remove sulfur from the catalytic converters. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.