NHTSA recall 25V555000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 25V555000 |
| Manufacturer's number | RP1064 |
| Manufacturer | Polestar Automotive USA, Inc. |
| Reported | 2025-08-26 |
| Owners notified | 2025-09-30 |
| Component | STRUCTURE:BODY:BUMPERS |
| Units potentially affected | 68 |
| Part numbers | 40008105 |
| Report | Quarterly report 4, for 2026 quarter 2 |
|---|---|
| Filed with NHTSA | 2026-07-07 |
| Vehicles in the campaign | 68 |
| Reported remedied | 49 (72%) |
| Reported unreachable | 0 |
| Reported removed | 0 |
These are the manufacturer's totals for the whole campaign at the end of 2026 quarter 2, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Polestar Automotive USA, Inc. (Polestar) is recalling certain 2025 Polestar 3 vehicles. The hood wing front bumper may be missing bolts, allowing the bumper to detach.
What can happen
A detached bumper can become a road hazard, increasing the risk of a crash.
The remedy
Polestar will inspect the hood wing bumper for missing screws. If any screws are missing, the bumper and screws will be replaced. Repairs will be performed free of charge. Owner notification letters were mailed September 30, 2025. Owners may contact Polestar's customer service at 1-800-806-2504. Polestar's number for this recall is RP1064.
| 2025 POLESTAR POLESTAR 3 | Built 2024-11-27 to 2025-05-17. |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SP1087 | 2026-07-14. Service campaign. There is risk of water intrusion into the cavity between the A pillar and the body side outer panel, located behind the right-hand side lower door hinge. This is because of the sealant not being correctly applied to effectively prevent water ingress. QB-S: Polestar has decided that all cars, concerned by this QB, shall be modified in accordance with this QB, at first workshop visit. A total of 966 U.S. and 1100 Canada vehicles are affected by this service action. |
|---|---|
| SP1080 | 2026-05-13. Service campaign. QB SP1080 addresses a tailgate water leak risk on certain MY2025 Polestar 3 vehicles caused by unsealed drilled holes, requiring a resealing repair at the first workshop visit to prevent water intrusion; 1,227 U.S. vehicles are affected. |
| SP1080 | 2026-03-02. Service campaign. QB SP1080 addresses a tailgate water leak risk on certain MY2025 Polestar 3 vehicles caused by unsealed drilled holes, requiring a resealing repair at the first workshop visit to prevent water intrusion; 1,227 U.S. vehicles are affected. |
| SP1067 | 2025-12-02. Service campaign. Polestar Automotive USA, on behalf of Polestar Performance AB, has decided to launch Service Action SP1067: Polestar 3 steering shaft plate sealing on certain model year 2025 Polestar 3 vehicles. Polestar has identified that the sealant amount that was applied between the body plate in the steering shaft area may be insufficient. As a result, water may enter the cabin and cause the carpet to become wet. The corrective action is to reseal the body plate. A total of 145 U.S. vehicles are affected by this service action. |
| 37186 | 2025-03-27. Service bulletin. This is a Technical Journal: Outer Door Handle Jamming. Make adjustments to door handle. |
| 36655 | 2025-03-27. Service bulletin. This is a Technical Journal: White patch defect in paint when removed rapgard. Expose to outside sunlight for 48hrs. |
| 37186 | 2025-01-07. Service bulletin. This is a Technical Journal: Outer Door Handle Jamming |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.