NHTSA recall 25V161000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 25V161000 |
| Manufacturer's number | 25C08 |
| Manufacturer | Ford Motor Company |
| Reported | 2025-03-14 |
| Owners notified | 2025-03-28 |
| Component | BACK OVER PREVENTION: SENSING SYSTEM: CAMERA |
| Units potentially affected | 4721 |
| Part numbers | SV4T-19G490-DB |
| Report | Quarterly report 6, for 2026 quarter 2 |
|---|---|
| Filed with NHTSA | 2026-07-17 |
| Vehicles in the campaign | 4721 |
| Reported remedied | 4309 (91%) |
| Reported unreachable | 11 |
| Reported removed | 0 |
These are the manufacturer's totals for the whole campaign at the end of 2026 quarter 2, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Ford Motor Company (Ford) is recalling certain 2025 Escape vehicles. The rearview camera may incorrectly display an inverted image when the vehicle is in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
What can happen
An inverted rearview camera image will not accurately display what is behind the vehicle, increasing the risk of a crash or injury.
The remedy
Dealers will inspect and replace the rearview camera as necessary, free of charge. Owner notification letters were mailed March 28, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C08.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 888-327-4236 (TTY 888-275-9171) or go to nhtsa.gov.
| 2025 FORD ESCAPE | Built 2024-12-10 to 2025-01-17. |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| TSB 25-2479 | 2025-11-13. Service bulletin. This article supersedes TSB 25-2249 to update the Service Procedure. Some of the vehicles listed in the Model statement above may exhibit a "Pre-Collision Assist Not Available" message in the IPC and at least one of the following conditions: Various driver assistance feature warning messages in the instrument panel cluster (IPC): - "Blind Spot System Fault" - "Cross-Traffic System Fault" - "Front Camera Fault - Service Required" Various data or lost communication diagnostic trouble codes (DTCs) stored in various modules Ford Diagnosis and Repair System (FDRS) scan tool cannot establish connectivity with the image processing module A (IPMA) during a self-test. This may be due to the software installed in the IPMA. *** MODEL SECTION **** 2023-2026 Escape equipped with minor feature code: DBCAB or DBCAA 2023-2026 Corsair equipped with minor feature code: DBCBC |
|---|---|
| SSM 54246 | 2025-10-02. Service bulletin. A small percentage of 2023-2025 Escape/Corsair vehicles may exhibit a "Pre-Collision Assist Not Available" warning message displayed in the instrument panel cluster (IPC) along with other various driver assistance feature warning messages and various invalid data/lost communication diagnostic trouble codes (DTCs) stored in various modules after Technical Service Bulletin (TSB) 25-2249 has been performed. The reoccurrence of these symptoms is related to a different root cause. This condition does not affect vehicle durability, and no additional diagnosis or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in late October 2025. Replacement of the image processing module A (IPMA) will not resolve this condition. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.