NHTSA recall 22V382000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 22V382000 |
| Manufacturer's number | 22S37 |
| Manufacturer | Ford Motor Company |
| Reported | 2022-05-27 |
| Owners notified | 2022-06-15 |
| Component | POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) |
| Units potentially affected | 25032 |
| Part numbers | KCGZMFN411, KCGZMFN406, KCGZMFN311, KCGZMFN306, KCGZMFN211, KCGZMFN206, KCGZMFN111, KCGZMFN106 |
| Report | Annual report 2, for 2025 quarter 2 to 2026 quarter 1 |
|---|---|
| Filed with NHTSA | 2026-04-24 |
| Vehicles in the campaign | 25032 |
| Reported remedied | 17083 (68%) |
| Reported unreachable | 759 |
| Reported removed | 16 |
These are the manufacturer's totals for the whole campaign at the end of 2026 quarter 1, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Ford Motor Company (Ford) is recalling certain 2019-2020 Mustang vehicles equipped with 5.0L engines and manual transmissions. The Powertrain Control Module (PCM) may broadcast an unintended faulted signal to the modules controlling the reverse camera, reverse light, and driver assist features, which may disable all of these functions.
What can happen
A rearview camera or reverse light that is disabled reduces the driver's rear view, increasing the risk of a crash. Disabled driver assist features (traction control, forward collision warning, blind spot warning, cross traffic indicator) may increase the risk of a crash.
The remedy
Dealers will update the PCM software, free of charge. Owner notification letters were mailed June 15, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S37.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
| 2019 FORD MUSTANG | |
|---|---|
| 2020 FORD MUSTANG |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| TSB 23-2350 | 2023-11-22. Service bulletin. Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang, 2019-2023 Ranger vehicles equipped with a 10R80 transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve. To correct the condition, follow the Service Procedure to identify and correct the condition. |
|---|---|
| SSM 51232 | 2023-01-05. Service bulletin. Some 2018-2022 Mustang vehicles equipped with a 5.0L engine and a 10R80 transmission may exhibit a buck/jerk sensation that may be perceived as an engine misfire during throttle tip-in between 35-45 MPH (56-72 KPH) and with the transmission in 8th, 9th, or 10th gear. This buck/jerk sensation can be compared to a like vehicle that is equipped with a similar powertrain (engine, transmission, and rear end gear ratio) and driven in the same manner. A diagnostic trouble code (DTC) will not set because of this condition. If a misfire DTC is present, the DTC should be diagnosed first following the correct diagnostic procedure outlined in the Workshop Manual, Section 303-07B. |
| TSB 22-2302 | 2022-07-28. Service bulletin. Some 2018-2020 Mustang vehicles equipped with a 5.0L engine and an MT-82 manual transmission may experience a loss of movement and/or difficulty shifting. This may be due to excessive wheel hop which is caused by aggressive acceleration at low speeds while using launch control. To correct the condition, follow the Service Procedure to replace the failed components and replace the peak torque limiter. |
| TSB 22-2280 | 2022-07-18. Service bulletin. Some 2020-2021 Mustang GT500 vehicles may experience erratic and harsh shifting at highway speeds and/or perceived lack of power when accelerating from a stop, with a powertrain malfunction (wrench) indicator and diagnostic trouble codes (DTCs) P1601 and/or P061A stored in the powertrain control module (PCM) while using SelectShift. This may be due to the software in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM. |
| TSB 21-2315 | 2021-10-05. Service bulletin. Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang and 2019-2021 Ranger vehicles equipped with a 10R80 automatic transmission may exhibit a harsh engagement/harsh shift/delayed shift. It is possible the vehicle may also have an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to incompatibility of the adaptive calibration to adapt to hardware wear-in over time. To correct the condition, follow the Service Procedure steps to overhaul the main control valve body and/or perform an adaptive learning drive cycle. |
| SSM 50103 | 2021-09-28. Service bulletin. Some 2020 Mustang vehicles equipped with a 5.0L engine built on 01-Sep-2020 and through 01-Dec-2020 may experience an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0369 in the powertrain control module (PCM). This may be due to a flatness concern on the mega cap on the right hand cylinder head. To correct the condition, replace the right-hand cylinder head. Refer to Workshop Manual (WSM), Section 303-01B > Removal and installation > Cylinder Head RH. For claiming, use causal part 6049 and applicable labor times in Section 06 of the Service Labor Time Standards (SLTS) Manual. |
| SSM 49821 | 2021-06-01. Service bulletin. Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual. |
| SSM 49292 | 2020-11-04. Service bulletin. Some 2018-2020 Ford and Lincoln vehicles may exhibit inoperative remote features via the Ford Pass/Lincoln Way mobile app, incomplete user authorization, no modem electronic serial number (ESN) displayed or DTCs U2100 and/or B156D in the telematics control unit (TCU). These symptoms may persist even after performing a TCU software update and/or replacement. To correct this condition, start a new session with the latest version of the appropriate diagnostic scan tool and perform a PMI on the TCU. If issues persist, open a hotline assistance request and include the IDS version (if applicable) used to perform the PMI and the Authorization Status PID value in the TCU datalogger. For claiming use causal part 14H092 and applicable labor times in Section 10 of the Service Labor Time Standards (SLTS) Manual. |
| TSB 19-2201 | 2019-09-06. Service bulletin. Some 2018-2019 Mustang vehicles equipped with a 5.0L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0420 and/or P0430. This may be due to the operation of the PCM. To correct the condition, follow the Service Procedure steps to replace the affected catalytic converter and reprogram the powertrain control module (PCM). |
| SSM 47750 | 2019-03-04. Service bulletin. Some 2018-2019 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 or no modem electronic serial number (ESN) displayed. To correct this condition prior to programing remove the TCU fuse for 5 minutes then reinstall. Delete all previous session files for the vehicle. Verify that the electronic serial number (ESN) is now displayed. Start a new IDS/FDRS session. Program the TCU to the latest IDS/FDRS version level. Make sure you are connected to the internet before retesting. If the concern is still present, follow normal diagnostics in Workshop Manual(WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.