NHTSA recall 22V334000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 22V334000 |
| Manufacturer's number | 22S34 |
| Manufacturer | Ford Motor Company |
| Reported | 2022-05-13 |
| Owners notified | 2022-05-27 |
| Component | FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA |
| Units potentially affected | 32 |
| Part numbers | MR3T-19H406-CF |
| Report | Annual report 2, for 2025 quarter 2 to 2026 quarter 1 |
|---|---|
| Filed with NHTSA | 2026-04-24 |
| Vehicles in the campaign | 32 |
| Reported remedied | 30 (93%) |
| Reported unreachable | 0 |
| Reported removed | 0 |
These are the manufacturer's totals for the whole campaign at the end of 2026 quarter 1, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Ford Motor Company (Ford) is recalling certain 2022 Mustang vehicles equipped with an Image Processing Module A (IPMA) or forward-facing camera. The camera is misaligned to the vehicle, resulting in the camera not functioning as intended.
What can happen
A front-facing camera that is not functioning properly may restrict or disable certain features including Pre-Collision Assist, Adaptive Cruise Control, Lane Keeping System, Driver Alert, and Auto High Beam Control, increasing the risk of a crash.
The remedy
Dealers will realign the front-facing camera, free of charge. Owner notification letters were mailed on May 27, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S34.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
| 2022 FORD MUSTANG |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SSM 54720 | 2026-04-10. Service bulletin. Various 2020-2026 Ford and Lincoln vehicles equipped with blind spot information system (BLIS) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster (IPC). This may also be accompanied by diagnostic trouble codes (DTCs) B118C:11 and/or B118C:15 stored in the driver door module (DDM), and/or B118D:11 and/or B118D:15 stored in the passenger door module (PDM). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z-14A411-B to resolve the concern. |
|---|---|
| 25N17 | 2026-03-27. Other. Advance Notice – Customer Satisfaction Program 25N17 Certain 2015-2025 Model Year Multiple Vehicle Lines Rear View Camera Replacement If Required After Dealer Evaluation |
| SSM 54313 | 2025-10-28. Service bulletin. Some 2020-2025 various Ford and Lincoln vehicles equipped with blind spot information system (BLIS) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster (IPC). This may also be accompanied by diagnostic trouble codes (DTCs) B118C:11 and/or B118C:15 stored in the driver door module (DDM), and/or B118D:11 and/or B118D:15 stored in the passenger door module (PDM). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z-14A411-B to resolve the concern. |
| OTA24PU0102CSUFX | 2024-03-07. Service bulletin. Software Update 24-PU0102-CHG-SUFX for 2021-2023 MY Mach E vehicles is now available. Quality Improvements include: - Improved robustness in alignment of turtle light display to reduced power event. - Improved AC Charge process reporting accuracy - Improves HV Battery Charging experience. - Robustness actions for DC Fast Charge: charging and diagnostics. - Improvements to On Demand Preconditioning. - The customer is instructed to exit the vehicle when a battery hazard is detected. - Adds torque to front drive unit to help whine at 30- 70 mph coast condition - Corrects software issue relating to charging which may occur after the BCCM receives an Over The Air (OTA) update. - Corrects ABS cal files |
| OTAPU0102SVDFX2 | 2024-03-07. Service bulletin. Software Update FPU 23-PU1113-UNX-DC for 2021-2023 MY Mach E vehicles is now available. Quality Improvements include- The customer is instructed to exit the vehicle when a battery hazard is detected |
| TSB 23-2021 | 2023-01-31. Service bulletin. Some 2021-2022 Mustang Mach-E vehicles equipped with the rear view camera system only may exhibit the Reverse Brake Assistance Not Available message and diagnostic trouble code (DTC) B1578:78 stored in the image processing module A (IPMA) that cannot be cleared. This may be due to the IPMA software. To correct this condition, follow the Service Procedure to reprogram the IPMA to the latest level. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.