NHTSA recall 20V573000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 20V573000 |
| Manufacturer's number | 20S52 |
| Manufacturer | Ford Motor Company |
| Reported | 2020-09-23 |
| Owners notified | 2021-01-26 |
| Component | SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES; SERVICE BRAKES |
| Units potentially affected | 38005 |
| Part numbers | FR53 2455-AF, FR53 2455-AE |
| Report | Annual report 3, for 2025 quarter 1 to 2025 quarter 4 |
|---|---|
| Filed with NHTSA | 2026-01-12 |
| Vehicles in the campaign | 38005 |
| Reported remedied | 37246 (98%) |
| Reported unreachable | 214 |
| Reported removed | 25 |
These are the manufacturer's totals for the whole campaign at the end of 2025 quarter 4, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Ford Motor Company (Ford) is recalling certain 2020 Mustang vehicles equipped with automatic transmissions. The brake pedal bracket may fracture during sudden stopping.
What can happen
A broken brake pedal could affect braking ability, increasing the risk of a crash.
The remedy
Ford will notify owners, and dealers will replace the brake pedal bracket assembly, free of charge. The recall began January 26, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20S52.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2020 FORD MUSTANG | Built 2019-03-04 to 2020-08-13. |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SSM 51261 | 2023-01-06. Service bulletin. Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00. |
|---|---|
| SSM 51120 | 2022-10-11. Service bulletin. Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00. |
| TSB 22-2362 | 2022-09-30. Service bulletin. Some 2020-2022 Mustang Shelby GT500 vehicles may exhibit an intermittent parking brake fault message in the instrument panel cluster (IPC) with diagnostic trouble codes (DTCs) C1034, C2005, C2006, C2007 and/or C2008 stored in the anti-lock brake system (ABS) module and/or a parking brake that sticks after being applied. This may be due to internal binding of the piston within the parking brake caliper. To correct the condition, follow the Service Procedure to replace the parking brake caliper(s). |
| SSM 50064 | 2021-09-04. Service bulletin. Some 2013-2021 Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.