NHTSA recall 20V513000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 20V513000 |
| Manufacturer's number | W63 |
| Manufacturer | Chrysler (FCA US LLC) |
| Reported | 2020-08-27 |
| Owners notified | 2020-09-10 |
| Component | VEHICLE SPEED CONTROL:ACCELERATOR PEDAL |
| Units potentially affected | 160229 |
| Part numbers | 6RN631N8AA, 6RN631N8AB, 6RN631X7AA, 6RN631X7AB, 6RN601XRAA, 6RN601XRAB, 6RN601X7AA, 6RN601X7AB |
| Report | Annual report 3, for 2024 quarter 3 to 2025 quarter 2 |
|---|---|
| Filed with NHTSA | 2025-07-21 |
| Vehicles in the campaign | 160229 |
| Reported remedied | 137818 (86%) |
| Reported unreachable | 961 |
| Reported removed | 929 |
These are the manufacturer's totals for the whole campaign at the end of 2025 quarter 2, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Chrysler (FCA US LLC) is recalling certain 2019-2020 Ram 1500 vehicles equipped with adjustable pedals. In certain accelerator pedal positions, the floormats may prevent the pedal from returning to the normal resting (idle) position.
What can happen
A pedal that does not return as expected may affect the vehicle's deceleration, thereby increasing the risk of a crash.
The remedy
Chrysler will notify owners, and dealers will modify the driver's floormat to remove the potential for pedal interference, free of charge. The recall began September 10, 2020. Owners may contact FCA US LLC customer service at 1-800-853-1403. Chrysler's number for this recall is W63.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2019 RAM 1500 | |
|---|---|
| 2020 RAM 1500 |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 9100247 | 2023-12-18. Service bulletin. ERG Hydraulic Tensioner Before replacing any FEAD components, please check FEAD belt layout as per the engine sales code. Customer complaint may include a noise from under the hood described as a squeal, screech, squeak, chirp or belt-related noise and/or noisy tensioner/pulley. Please refer to SOL# S2309000007. |
|---|---|
| S1808000152 | 2023-10-02. Service bulletin. CEL (Check Engine Lamp) Illuminated, P057B Brake Pedal Position Sensor Performance |
| S1623000028 Rev. | 2023-02-13. Service bulletin. Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position. |
| S2323000008 | 2023-02-13. Service bulletin. Buzz Squeak Or Rattle Noise From Left Side Driver Door Area. |
| W95 | 2023-01-17. Service bulletin. Customer Satisfaction Notification W95 Built to Serve 1" Lift Springs |
| S2208000177 | 2022-12-12. Service bulletin. Speed Control Operates Intermittently |
| 9004324A | 2022-10-17. Service bulletin. SEAL, REAR DOOR GLASS RUN Loose, deformed and torn door seals. If the door seal in question is being ordered for any of these conditions please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair. Please take pictures of the area identifying the door and seal affected as well as the VIN of the vehicle and email pictures to FCA Redacted Content. |
| 9004324 | 2022-10-17. Service bulletin. SEAL, REAR DOOR GLASS RUN Loose, deformed and torn door seals. If the door seal in question is being ordered for any of these conditions please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair. Please take pictures of the area identifying the door and seal affected as well as the VIN of the vehicle and email pictures to FCA Redacted Content |
| 9004262 | 2022-10-17. Service bulletin. BUMPER, Tailgate (U-frame) When swing doors are opened on multi-function tailgate the overslam bumper sticks to the door and pulls out of the U-frame. If bumper is still stuck to the swing door remove and resecure using Mopar Bond-All Gel PN 04467709AA. It is recommended to apply adhesive to the mounting face of all 4 bumpers and replace any missing bumpers as required. Use adhesive sparingly to avoid squeeze out and follow manufacturers recommendations for surface preparation and cure time. |
| 0811621 | 2022-09-26. Service bulletin. Flash: Driver Door Module (DDM) and Passenger Door Module (PDM) Updates This bulletin involves reprogramming the DDM and PDM with the latest available software. Customers may experience one or more of the following:Exterior mirrors do not return to the original position after shifting out of reverse gear. Exterior mirrors continue to tilt downwards even after shifting out of reverse gear. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.