WenmarOpen by Wenmar Pro

Service bulletin W95

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10230241
Published by NHTSA2023-01-17
Manufacturer's numberW95
Manufacturer's date2021-07-09
NHTSA componentVEHICLE SPEED CONTROL:SPRINGS

NHTSA's summary

Customer Satisfaction Notification W95 Built to Serve 1" Lift Springs

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Throttle and cruise control

Vehicles listed
RAM 15002020

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
20V5130002020-08-27. VEHICLE SPEED CONTROL:ACCELERATOR PEDAL

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
91002472023-12-18. Service bulletin. ERG Hydraulic Tensioner Before replacing any FEAD components, please check FEAD belt layout as per the engine sales code. Customer complaint may include a noise from under the hood described as a squeal, screech, squeak, chirp or belt-related noise and/or noisy tensioner/pulley. Please refer to SOL# S2309000007.
S18080001522023-10-02. Service bulletin. CEL (Check Engine Lamp) Illuminated, P057B Brake Pedal Position Sensor Performance
S1623000028 Rev.2023-02-13. Service bulletin. Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
S23230000082023-02-13. Service bulletin. Buzz Squeak Or Rattle Noise From Left Side Driver Door Area.
S22080001772022-12-12. Service bulletin. Speed Control Operates Intermittently
9004324A2022-10-17. Service bulletin. SEAL, REAR DOOR GLASS RUN Loose, deformed and torn door seals. If the door seal in question is being ordered for any of these conditions please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair. Please take pictures of the area identifying the door and seal affected as well as the VIN of the vehicle and email pictures to FCA Redacted Content.
90043242022-10-17. Service bulletin. SEAL, REAR DOOR GLASS RUN Loose, deformed and torn door seals. If the door seal in question is being ordered for any of these conditions please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair. Please take pictures of the area identifying the door and seal affected as well as the VIN of the vehicle and email pictures to FCA Redacted Content
90042622022-10-17. Service bulletin. BUMPER, Tailgate (U-frame) When swing doors are opened on multi-function tailgate the overslam bumper sticks to the door and pulls out of the U-frame. If bumper is still stuck to the swing door remove and resecure using Mopar Bond-All Gel PN 04467709AA. It is recommended to apply adhesive to the mounting face of all 4 bumpers and replace any missing bumpers as required. Use adhesive sparingly to avoid squeeze out and follow manufacturers recommendations for surface preparation and cure time.
08116212022-09-26. Service bulletin. Flash: Driver Door Module (DDM) and Passenger Door Module (PDM) Updates This bulletin involves reprogramming the DDM and PDM with the latest available software. Customers may experience one or more of the following:Exterior mirrors do not return to the original position after shifting out of reverse gear. Exterior mirrors continue to tilt downwards even after shifting out of reverse gear.
90043962022-09-26. Service bulletin. WEATHERSTRIP (Front and Rear Door Triple Seals) Please call FCA Redacted Content prior to performing a repair on the triple seal. If no response in 15 minutes, please proceed with repair. Once the seal is replaced please return the seal to QEC on part retention for further investigation.