NHTSA recall 20V154000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 20V154000 |
| Manufacturer's number | RE20/06 |
| Manufacturer | Bentley Motors, Inc. |
| Reported | 2020-03-18 |
| Owners notified | 2020-05-20 |
| Component | SEAT BELTS:REAR/OTHER |
| Units potentially affected | 281 |
| Report | Annual report 3, for 2024 quarter 2 to 2025 quarter 1 |
|---|---|
| Filed with NHTSA | 2025-04-28 |
| Vehicles in the campaign | 281 |
| Reported remedied | 270 (96%) |
| Reported unreachable | 0 |
| Reported removed | 0 |
These are the manufacturer's totals for the whole campaign at the end of 2025 quarter 1, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Bentley Motors, Inc. (Bentley) is recalling certain 2018-2020 Bentayga vehicles equipped with third-row seats. The third-row upper seat belt attachment may not stay connected to the vehicle in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages."
What can happen
If the seat belt is not properly secured in the event of a crash, the occupant will not be properly restrained, increasing their risk of injury.
The remedy
Bentley will notify owners, and dealers will replace the upper seat belt attachment bolt, free of charge. The recall began May 20, 2020. Owners may contact Bentley customer service at 1-800-777-6923. Bentley's number for this recall is RE20/06.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2018 BENTLEY BENTAYGA | Built 2017-02-03 to 2020-01-23. |
|---|---|
| 2019 BENTLEY BENTAYGA | Built 2017-02-03 to 2020-01-23. |
| 2020 BENTLEY BENTAYGA | Built 2017-02-03 to 2020-01-23. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 2075786/3 | 2026-07-29. Service bulletin. Airbag, fire, accident (safety-related enquiry - reporting forms) There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year. |
|---|---|
| 2075786/2 | 2025-10-30. Service bulletin. Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year. |
| 2075786/1 | 2025-06-06. Service bulletin. Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year. |
| 2070998/1 | 2023-08-03. Service bulletin. Rear seatbelt - Incorrect buckle status within the DIP - Bentayga Series. Customer statement: Incorrect rear seatbelt buckle status shown within the DIP Workshop findings: Although there is no occupant evident within the rear seats (2nd row) the rear seat is shown as occupied (Figure 1). Technical background: There is no specific DTC evident for the scenario described. The issue described is evident as the rear seat belt buckles are not resistor coded The system uses a non-resistor coded buckle strategy (zero-infinity or open-closed buckle) for the rear seats. In correct operation, a fastened seatbelt is open circuit and an un-fastened seatbelt is closed circuit If harness damage is present or an electrical connector joint is not properly engaged, an unintended open circuit occurs. This will give an incorrect buckle status reading within the DIP The advice within this TPI should be referred to first before conducting any further diagnosis or disassembly of the vehicles interior Previous assembly/disassembly may have caused an unintentional open circuit when operatives have been working on or around the rear seat belt assemblies |
| 2058411/4 | 2021-11-06. Service bulletin. Seat belt buckle stop button - Missing, Condition: Seat belt buckle stop button missing Technical Background: The seat belt buckle stop button should be evident as shown in Figure 1. Should the seatbelt be as shown in Figure 2 (Buckle stop button missing OR broken/loose) - Refer to the Measure section of this TPI |
| 2058411/2 | 2020-11-05. Service bulletin. Seat belt buckle stop button - Missing. Customer statement / workshop findings: Seat belt buckle stop button missing Technical background: The seat belt buckle stop button should be evident as shown in Figure 1 |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.