NHTSA recall 20V080000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 20V080000 |
| Manufacturer's number | W06 |
| Manufacturer | Chrysler (FCA US LLC) |
| Reported | 2020-02-13 |
| Owners notified | 2020-03-10 |
| Component | POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE) |
| Units potentially affected | 11 |
| Report | Quarterly report 6, for 2021 quarter 2 |
|---|---|
| Filed with NHTSA | 2021-07-19 |
| Vehicles in the campaign | 11 |
| Reported remedied | 10 (90%) |
| Reported unreachable | 0 |
| Reported removed | 0 |
These are the manufacturer's totals for the whole campaign at the end of 2021 quarter 2, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Chrysler (FCA US LLC) is recalling certain 2019 Ram 1500 pickup trucks equipped with four-wheel drive. A gear within the transfer case may not have been installed correctly, possibly causing the vehicle to become stuck in neutral. If this occurs while driving, there could be a sudden loss of power. Additionally, a loss of 'PARK' function may occur.
What can happen
A sudden loss of power or a loss of 'PARK' function may increase the risk of a crash.
The remedy
Chrysler will notify owners, and dealers will replace the transfer case, free of charge. The recall began March 10, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W06.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2019 RAM 1500 |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 08-094-20 | 2020-11-30. Service bulletin. Flash: Drivetrain Control Module (DTCM) Update This bulletin involves reprogramming the DTCM with the latest available software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set::If the customer has any concerns with the transfer case or if the tech performs any repairs on the transfer case, the software must be updated.C140E - Transfer Case Motor Blocked. If DTC C140E is present, follow normal diagnostic procedures before updating the DTCM.In addition the customer may describe the following:The ?Service 4WD? message/fault is displayed in the Instrument Panel Cluster (IPC). Transfer case shift fork tabs broken during range shift. Noisy (clunking/ratcheting) transfer case range shifts. Failure to complete transfer case range shifts. The following software enhancement is available:This update will help reduce premature transfer case failure. |
|---|---|
| 68090604A | 2018-11-26. Service bulletin. Power Transfer Unit Prior to replacing the PTU, please review the following .~ Check if the service 4WD light is intermittent by driving under heavy throttle will produce a C1494-92 DTC, if yes, please call FCA axle engineering and do not replace the PTU. Bruce Michel at cell (248) 260-8641, or Jian Zhu at cell (248) 379- 1132. If neither answers with 15 minutes then proceed with the repair. ~ If the service 4WD light lamp is on steady then replace the Power Transfer Unit. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.