NHTSA recall 19V248000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 19V248000 |
| Manufacturer's number | V31 |
| Manufacturer | Chrysler (FCA US LLC) |
| Reported | 2019-03-28 |
| Owners notified | 2019-04-11 |
| Component | SEATS |
| Units potentially affected | 253 |
| Report | Quarterly report 6, for 2020 quarter 3 |
|---|---|
| Filed with NHTSA | 2020-10-21 |
| Vehicles in the campaign | 253 |
| Reported remedied | 200 (79%) |
| Reported unreachable | 5 |
| Reported removed | 1 |
These are the manufacturer's totals for the whole campaign at the end of 2020 quarter 3, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Chrysler (FCA US LLC) is recalling certain 2019 Jeep Cherokee vehicles. The front passenger seat mounting bolts may be loose.
What can happen
In the event of a crash, the seat may move, increasing the risk of injury.
The remedy
Chrysler has notified owners, and dealers will tighten the mounting bolts, free of charge. The recall began April 11, 2019. Owners may contact FCA US customer service at 1-800-853-1403. Chrysler's number for this recall is V31.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2019 JEEP CHEROKEE | Built 2018-11-26 to 2018-11-26. |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 2300521 | 2022-10-17. Service bulletin. Front Seat Side Shield Updated Service Procedure This bulletin informs the technician that when either of the front seat side shields are replaced the buckle will need to be replaced as well. If only the buckle needs to be replaced the front seat side shield will need to be modified. The technician will need to know the following: When either of the front seat side shields are replaced the buckle will need to be replaced as well. If only the buckle needs to be replaced the front seat side shield will need to be modified. |
|---|---|
| 2300521REVB | 2022-09-26. Service bulletin. Front Seat Side Shield Updated Service Procedure This bulletin informs the technician that when either of the front seat side shields are replaced the buckle will need to be replaced as well. If only the buckle needs to be replaced the front seat side shield will need to be modified. The technician will need to know the following: When either of the front seat side shields are replaced the buckle will need to be replaced as well. If only the buckle needs to be replaced the front seat side shield will need to be modified. |
| 9003825 | 2022-09-15. Service bulletin. LATCH, Hood For the following concerns, please verify secondary plunger switch before replacing hood latch with primary switch. Please refer to service information for complete diagnostics of the secondary plunger switch which is located in the left front under hood on RU, MP, and WK/WD and left rear under hood on KL. 1) Electronic Stop Start Message on Cluster or DTC P152F without hood ajar illuminated. 2) KL Hood ajar light is on or unlatched hood due to high closing effort. (KL hood may have a higher closing effort to latch the hood as rubber bumper interference is set purposely high to prevent hood flutter at highway speeds) If stop start message or DTC P152F is present on vehicles without a hood ajar light illuminated, the issue is not related to the primary hood latch switch. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.