NHTSA recall 19V071000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 19V071000 |
| Manufacturer's number | 19C02 |
| Manufacturer | Ford Motor Company |
| Reported | 2019-02-01 |
| Owners notified | 2019-02-22 |
| Component | POWER TRAIN:AUTOMATIC TRANSMISSION |
| Units potentially affected | 2992 |
| Report | Quarterly report 6, for 2020 quarter 2 |
|---|---|
| Filed with NHTSA | 2020-07-29 |
| Vehicles in the campaign | 2992 |
| Reported remedied | 2723 (91%) |
| Reported unreachable | 3 |
| Reported removed | 0 |
These are the manufacturer's totals for the whole campaign at the end of 2020 quarter 2, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Ford Motor Company (Ford) is recalling certain 2019 Ranger vehicles equipped with 10-speed automatic transmissions. In some of these vehicles, the transmission shift lever can be moved from the "Park" position without the key in the starting system and without depressing the brake pedal. As a result, these vehicles fail to comply with Federal Motor Vehicle Safety Standard (FMVSS) number 114, "Theft Protection."
What can happen
If the vehicle can be shifted out of Park without the brake applied, the vehicle may unexpectedly move. Unintentional vehicle movement can increase the risk of injury or crash.
The remedy
Ford has notified owners, and dealers will inspect and repair the transmission floor shift selector interlock assembly, as necessary, free of charge. The recall began February 22, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19C02.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2019 FORD RANGER | Built 2018-06-04 to 2019-01-09. |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| TSB 23-2350 | 2023-11-22. Service bulletin. Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang, 2019-2023 Ranger vehicles equipped with a 10R80 transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve. To correct the condition, follow the Service Procedure to identify and correct the condition. |
|---|---|
| TSB 23-2011 | 2023-01-31. Service bulletin. Some 2019-2022 Ranger vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300, P0301, P0302, P0303, P0304 and/or P0316 stored in the powertrain control module (PCM). This may be due to water build up in the spark plug well(s) which can lead to signs of corrosion on ignition system components. To correct the condition, follow the Service Procedure to resolve the source of all DTCs and to install an engine appearance cover. |
| TSB 22-2025 | 2022-02-16. Service bulletin. Some 2019-2022 Ranger vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300, P0301, P0302, P0303, P0304 and/or P0316 stored in the powertrain control module (PCM). This may be due to water build up in the spark plug well(s) which can lead to signs of corrosion on ignition system components. To correct the condition, follow the Service Procedure to resolve the source of all DTCs and to install an engine appearance cover. |
| TSB 21-2315 | 2021-10-05. Service bulletin. Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang and 2019-2021 Ranger vehicles equipped with a 10R80 automatic transmission may exhibit a harsh engagement/harsh shift/delayed shift. It is possible the vehicle may also have an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to incompatibility of the adaptive calibration to adapt to hardware wear-in over time. To correct the condition, follow the Service Procedure steps to overhaul the main control valve body and/or perform an adaptive learning drive cycle. |
| TSB 21-2147 | 2021-07-01. Service bulletin. Some 2019-2021 Ranger vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300, P0301, P0302, P0303, P0304 and/or P0316 stored in the powertrain control module (PCM). This may be due to water build up in the spark plug well(s) which can lead to signs of corrosion on ignition system components. To correct the condition, follow the Service Procedure to resolve the source of all DTCs and to install an engine appearance cover. |
| SSM 49821 | 2021-06-01. Service bulletin. Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual. |
| SSM 49292 | 2020-11-04. Service bulletin. Some 2018-2020 Ford and Lincoln vehicles may exhibit inoperative remote features via the Ford Pass/Lincoln Way mobile app, incomplete user authorization, no modem electronic serial number (ESN) displayed or DTCs U2100 and/or B156D in the telematics control unit (TCU). These symptoms may persist even after performing a TCU software update and/or replacement. To correct this condition, start a new session with the latest version of the appropriate diagnostic scan tool and perform a PMI on the TCU. If issues persist, open a hotline assistance request and include the IDS version (if applicable) used to perform the PMI and the Authorization Status PID value in the TCU datalogger. For claiming use causal part 14H092 and applicable labor times in Section 10 of the Service Labor Time Standards (SLTS) Manual. |
| TSB 20-2339 | 2020-10-02. Service bulletin. Some 2019 Ranger vehicles may exhibit a vehicle buck/surge during low speed operation and/or an engine that runs rough after cold start. This may be due to various software parameters within the powertrain control module (PCM). To correct the condition, follow the Service Procedure to reprogram the PCM. |
| TSB 20-2152 | 2020-06-04. Service bulletin. Some 2019 Ranger vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0299 stored in the powertrain control module (PCM). This may be due to various software parameters within the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.