WenmarOpen by Wenmar Pro

NHTSA recall 17V371000

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

Campaign
Published byNHTSA (United States)
Campaign number17V371000
Manufacturer's numberT34
ManufacturerChrysler (FCA US LLC)
Reported2017-06-09
Owners notified2017-09-14
ComponentHYBRID PROPULSION SYSTEM: INVERTER
Units potentially affected1375
Remedy progress the manufacturer reported
ReportQuarterly report 6, for 2018 quarter 4
Filed with NHTSA2019-01-16
Vehicles in the campaign1375
Reported remedied1170 (85%)
Reported unreachable35
Reported removed18

These are the manufacturer's totals for the whole campaign at the end of 2018 quarter 4, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.

What is wrong

Chrysler (FCA US LLC) is recalling certain 2017-2018 Pacifica Plug-in Hybrid Electric vehicles (PHEV). The affected vehicles have diodes in the Power Inverter Module ("PIM") that may fail due to an overvoltage condition. If the diodes fail, the vehicle will not move under its own power.

What can happen

A vehicle that suddenly cannot be driven, increases the risk of a crash.

The remedy

Chrysler will notify owners, and dealers will reprogram the Powertrain Control Module, Battery Pack Control Module, On Board Charging Module, and PIM, free of charge. The PIM will be replaced as necessary. The recall began on September 14, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T34.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Vehicles this campaign lists
2017 CHRYSLER PACIFICA PLUG-IN HYBRIDBuilt 2016-08-12 to 2017-06-21. Listed as a series or trim of this model.

A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.

Bulletins for the same vehicles and component

Bulletins for the same vehicles and component
08-130-212022-08-22. Service bulletin. Flash: Battery Pack Control Module (BPCM) Diagnostic and System Updates This bulletin involves updating the BPCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, the technician may one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P0AA1-00 - Hybrid/EV Battery Positive Contactor ?A? Stuck Closed. P0AA4-00 - Hybrid Battery Negative Contactor Circuit Stuck Closed. P0C78-00 - Hybrid/EV Battery System Precharge Time Too Long. P0B3C-00 - Hybrid/EV Battery Voltage Sense 1 Circuit Performance. P0B41-00 - Hybrid/EV Battery Voltage Sense 2 Circuit Performance. P0B46-00 - Hybrid/EV Battery Voltage Sense 3 Circuit Performance. P0B4B-00 - Hybrid/EV Battery Voltage Sense 4 Circuit Performance. P0B50-00 - Hybrid/EV Battery Voltage Sense 5 Circuit Performance. P0B55-00 - Hybrid/EV Battery Voltage Sense 6 Circuit Performance. P1A16-00 - Hybrid/EV Wakeup Control 3 Output Circuit/Open. P1D7B-00 - Hybrid/EV Wakeup Control 3 Output Circuit Short to Battery. P1D7C-00 - Hybrid/EV Wakeup Control 3 Output Circuit Short to Ground. P1A29 - Cell Supervisory Circuit A Failure. P1A2A - Cell Supervisory Circuit B Failure. P1D3E - Internal Control Module Shut Off Test Error. U0594 - Implausible Data Received from HCP. P2BE5 - Hybrid/EV Battery Pack Current Sensor "C" Circuit Performance. B12B0-85 - Charge Temperature Indicator-Signal Above Allowable Range. Customer may also experience one or more of the following: Premature oil change message displayed on the cluster and vehicle may be running in fuel/oil refresh mode. Scheduled charging not functioning properly because the battery pack did not wake up while plugged in.
23-047-172022-08-08. Service bulletin. Seat Pops or Clicks After Seatback Is Adjusted This bulletin involves adjusting the recliner cable on the second row quad seats. The customer may describe after adjusting one or both of the inboard seat upper seatbacks, a pop or clicking noise can be heard.
08-177-212021-12-13. Service bulletin. BEV/Hybrid - Showroom and Display Vehicle Battery Maintenance This information only bulletin discusses procedures that must be followed for BEV/Hybrid vehicles that are on display at dealership showrooms.

A bulletin is the manufacturer's note to its dealers. It is not part of this recall.

Check one vehicle officially