NHTSA recall 12V592000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 12V592000 |
| Manufacturer's number | 483 |
| Manufacturer | TRIUMPH MOTORCYCLES AMERICA LTD |
| Reported | 2012-12-11 |
| Owners notified | 2013-01-04 |
| Component | EQUIPMENT:OTHER:LABELS |
| Units potentially affected | 244 |
What is wrong
Triumph Motorcycles (Triumph) is recalling certain model year 2013 Trophy motorcycles manufactured from September 5, 2012, through November 29, 2012. These motorcycles were produced with a label bearing incorrect tire data which fails to conform to the labeling requirements of Federal Motor Vehicle Safety Standard No. 120, "Tire Selection and Rims for Motor Vehicles Other Than Passenger Cars," and they fail to comply with the certification requirements of 49 CFR Part 567, "Certification."
What can happen
Owners relying on the information contained in the label may install incorrect replacement tires, increasing the risk of personal injury.
The remedy
None of the affected motorcycles have been sold to consumers and they will be repaired prior to sale. Therefore, an owner notification letter will not be issued for this campaign. Owners may contact Triumph at 1-678-854-2010 for more information.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2013 TRIUMPH TROPHY | Built 2012-09-05 to 2012-11-29. |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SMT-COM01 | 2023-12-11. Service bulletin. Dealer notice announcing the availability of Diagnostic software 2023-06 and dealers should begin using it immediately. |
|---|---|
| 22714 | 2023-01-03. Service bulletin. Dealer notice announcing the availability of Diagnostic software 2022-11 and dealers should begin using it immediately. |
| 22651 | 2023-01-03. Service bulletin. Dealer notice announcing the availability of Diagnostic software 2022-10 and dealers should begin using it immediately. |
| SMT-SB-521 | 2021-05-10. Service bulletin. We have identified a need to carry out the following checks at PDI or at the motorcycles next visit to the deralership: To check the the tqoue of the six M4 screws on the alternator de-coupler. |
| SMT-SB-486 | 2021-05-10. Service bulletin. We have identified that the punch mark used to align the transmission linkage has in some instances been incorrectly positioned on the above models. Dealers are requested to check, and if necessary, adjust the gear change pedal position. |
| SMT-COM06-17MAR2 | 2020-04-13. Service bulletin. Dealer notice announcing the availability of Diagnostic software 2020-4.2 available and dealers should begin using it immediately. |
| SMT-COM02-18FEB2 | 2020-03-16. Service bulletin. Dealer notice announcing the auto-issue of three new service tools. |
| SMT-TB201-20DEC2 | 2020-01-21. Service bulletin. Technical Bulletin 200 provides instructions that apply to Steering Lock and Keys, Neutral Position Adaption, Triumph Diagnostic Tool - End of Support for Microsoft Windows 7®, Triumph Diagnostic Tool - Internet Connection and Minimum eEquipment Requirement, Torque Change, Clutch Cable, Camshaft Frame Installation, Immobiliser Antenna Wire Routing. |
| SMT-COM04-12MAR2 | 2019-04-22. Service bulletin. Notice to remind dealers on the availability of Technical Bulletin 194. |
| SMTTB19429 | 2019-03-18. Service bulletin. Technical Bulletin 194 provides instructions that apply to Front Master Cylinder Reservoir Cap Screws, Windscreen Support Fixings, Keyless Ignition, Clutch Cover Removal and Installation, Rider's Seat (single seat), Side Stand Spring Peg, Cylinder Head Installation, Alternator Oil Feed Spray Jet, Headlight and Indicator Wiring Harness Routing, Transmission Output Shaft, Horn Wire Routing, Instrument Downloads - 900cc and 1200cc Modern Classic Models with Analogue/LCD Instruments, Pinpoint Test - Engine Start/Stop Switch Correlation Error, Diagnostic Trouble Code (DTC) P2138 - Twist Grip Position Sensor 1 Correlation Error with Twist Grip Position Sensor 2, Electronic Systems Commissioning and Motorcycle Unlocking and Battery Anti-Tamper Label. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.