NHTSA recall 11V393000

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

Campaign
Published by	NHTSA (United States)
Campaign number	11V393000
Manufacturer's number	RM2011/015
Manufacturer	TRIUMPH MOTORCYCLES AMERICA LTD
Reported	2011-08-02
Owners notified	2011-09-02
Component	EQUIPMENT
Units potentially affected	134

What is wrong

TRIUMPH IS RECALLING CERTAIN MODEL YEAR 2011-2012 SPRINT GT, TIGER 800 AND TIGER 800 XC MOTORCYCLES MANUFACTURED FROM JUNE 2010 THROUGH JUNE 2011. THE TOP BOX LOCKING HANDLE IS MISSING A CLIP ON THE LOCKING MECHANISM AND THUS IT IS POSSIBLE THAT THE TOP BOX MAY DETACH FROM THE MACHINE.

What can happen

IF THE TOP BOX FALLS FROM THE MOTORCYCLE, IT COULD STRIKE ANOTHER VEHICLE, INCREASING THE RISK OF A CRASH.

The remedy

DEALERS WILL INSTALL A NEW FITMENT CLIP PART TO THE TOP BOX LOCKING HANDLE SPINDLE TO ALIGN THE RACK AND PINION MECHANISM TO PREVENT DISENGAGEMENT. THE SAFETY RECALL BEGAN ON SEPTEMBER 2, 2011. OWNERS MAY CONTACT TRIUMPH CUSTOMER SERVICE DEPARTMENT AT 1-678-539-8782.

Notes

TRIUMPH SAFETY RECALL NO. RM2011/015.OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .

Vehicles this campaign lists
2011 TRIUMPH SPRINT GT	Built 2010-06-01 to 2011-06-30. Listed as a series or trim of this model.
2012 TRIUMPH SPRINT GT	Built 2010-06-01 to 2011-06-30. Listed as a series or trim of this model.
2011 TRIUMPH TIGER 800	Built 2010-09-01 to 2011-06-30.
2012 TRIUMPH TIGER 800	Built 2010-09-01 to 2011-06-30.
2011 TRIUMPH TIGER 800 XC	Built 2011-09-01 to 2011-06-30. Listed as a series or trim of this model.
2012 TRIUMPH TIGER 800 XC	Built 2010-09-01 to 2011-06-30. Listed as a series or trim of this model.

A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.

Bulletins for the same vehicles and component

Bulletins for the same vehicles and component
SMT-COM01	2023-12-11. Service bulletin. Dealer notice announcing the availability of Diagnostic software 2023-06 and dealers should begin using it immediately.
22714	2023-01-03. Service bulletin. Dealer notice announcing the availability of Diagnostic software 2022-11 and dealers should begin using it immediately.
22651	2023-01-03. Service bulletin. Dealer notice announcing the availability of Diagnostic software 2022-10 and dealers should begin using it immediately.
20680 SVC	2022-05-31. Service bulletin. Triumph has released Technical Bulletin 222 including 8 subjects across a range of models.
SMT-TN-142	2021-05-10. Service bulletin. The drive chain vertical movement setting has changed to 20 - 30 mm for the above model. This change affects all bikes from the start of production. The Tiger 800XC setting has not changed and remains as described in the service manual and owner handbook. For the procedure to check and adjust the drive chain vertical movement setting refer to the service manual or owner handbook.
SMT-TN-139	2021-05-10. Service bulletin. A new sliding selector shaft and detent assembly has been introduced on the above models from engine number 563847. The new shaft is secured into the crankcase with E-clips and is not retrofittable. When ordering replacement parts, always refer to EPC.
SMT-COM06-17MAR2	2020-04-13. Service bulletin. Dealer notice announcing the availability of Diagnostic software 2020-4.2 available and dealers should begin using it immediately.
SMT-COM02-18FEB2	2020-03-16. Service bulletin. Dealer notice announcing the auto-issue of three new service tools.
SMT-TB201-20DEC2	2020-01-21. Service bulletin. Technical Bulletin 200 provides instructions that apply to Steering Lock and Keys, Neutral Position Adaption, Triumph Diagnostic Tool - End of Support for Microsoft Windows 7®, Triumph Diagnostic Tool - Internet Connection and Minimum eEquipment Requirement, Torque Change, Clutch Cable, Camshaft Frame Installation, Immobiliser Antenna Wire Routing.
SMTCom0111	2019-03-18. Service bulletin. Dealer notice announcing the availability of Technical Bulletin 193.